Alfa Romeo Forums banner
centerline
1-5 of 5 Results
  1. Suspension, Steering, Brakes, Wheels & Tires
    I bought the brake line kit from centerline but when I received it, it appeared that the kit isn't right for my car. I know centerline is good with their parts so I am wondering if my car isn't a stock setup. The lines on my car are as follows. 1. Master cylinder bottom hole to front driver...
  2. Sedan (1962-1977)
    I'm getting close to finishing my wiper / washer project and looking forward to a more "fun" project for the next. I'd like to use the Berlina more this summer for fun trips, so raising the front then getting an alignment is top on my list. Here's how she sits now: After checking...
  3. Engine Repair, Diagnostics & Rebuilding
    We have been freshening up a 76 2.0 litre head and after grinding we found this stem seal issue! The guides are not stock, or appear to be Centerline! They are for a 9mm stem! The boss or top is only 10MM OD. Much thinner then the 11.5 stock guides. Therefore the seal fit is loose and...
  4. Alfetta & GTV6 (1972-1986)
    Hey everyone, I've been sorting through the brake threads here on the 'BB but most of them are concerned with excellent products that are out of my budget. I need to replace pads and rotors on my '83. Currently running a very worn stock setup, stock 2.5L and suspension (soon to receive larger...
  5. Spider - 105 & 115 Series (1966-1994)
    Hi all, I'm redoing my exhaust and was planning on putting a stinger from Centerline on it. Well, Centerline is out of stock and doesn't know when they will get more. Does any other supplier carry these? Any alternative suggestions? Thanks! Bill
1-5 of 5 Results
Top