Hi all, I have a pair of Weber 40DCOE2 Carbs + Manifold that I don't need anymore. They are in good shape as you can see from the pictures but will need to be gone-through and rebuilt eventually.
They are located in Switzerland. The price is Euro 1900 + real shipping costs. An estimate is...
Pair of Weber 40 DCOM carbs for sale $350 OBO
Rebuilt with new gaskets all around
They work fine, going back to Spica on my S2 105 Spider
Air (Integrated) 150
Local pick up in Los Angeles or will ship at cost.
For sale: Weber 40DCOE 32 as removed in the 1990s. The body is missing one cover screw and one of the screws that covers part of the idle circuit (as shown in the overhead photo of a single carb). Carbs have metal floats and all pivots move freely; needs overall cleaning and replacement of...
After servicing my alfa DHLA40 carbs, i have a problem wiyh the pump adjustment in one of them! I cant get it to squirt the gas out like it should! The other carb is fine, so i changed every part with one another, and the problem remains... It points to a cloged fuel passage in the main...
Could do with the help of some experienced Alfisti here.
I have Emissions Delorto's DHLA 40's on my 2L 86 Spider S3.
These are G variant carbs.
Current Jetting is as follows:
Idle jet: 50 (was 48)
Emulsion Tube: 7482.3
Main jet: 148
I think the other jets are stock. Background - when i was...
I wonder if any technical gurus can help. I recently got some DHLA 40's for my 87 Spider S3 2000 Veloce. These carbs were off another 2000 Alfa engine so had the correct jetting.
I initially installed these and noticed that the engine was bogging down and even dropping revs between 2 - 3k...
Hi all. I've been lurking here for a bit, but now I really need help with getting my car right. It's a 73 2000 by the way.
I had the engine out to paint the engine bay recently, and I replaced the carb mounts with the aluminium one from Classic Alfa.
I didn't remove the distributor or anything...
Rebuilt motor with 10 1/1 mm cams, complete brake job with all new lines. Dropped front and rear suspension..the body has new front and rear clips from Classic Alfa...body stripped to bare metal...rockers need a to be done properly.
I can provide you with any part or accessory needed to to help...
Thanks in part to Gordon Raymond, who helped me get the brass throttle shaft of one Weber straight again, my are ready to install! Now I just have to wait until the temperature goes above 0F... here in Minneapolis.
Installing new throttle return springs made all the difference in how the...
Genuine european market 1750 spider with original dual dellorto carburetors. Originally sold in Germany and imported by a serviceman in the late 1980s. Currently located in southern California. AR 119 yellow paint is 8/10 with some patina. Round side markers and original carello headlight...
Rebuilt in Italy to new condition, paid $900 just a few years ago, never used. The carbs will fit any 1750 or 2000 Alfa Engine. Can also supply intake manifold.
Asking $900 for carbs alone or $1300 with manifold.
Also available: 1974 Alfa Romeo engine w/1750 pistons (modified in Germany)...
I just tried to have the Dellorto DHLA 40H carbs in my Alfetta GTV2000L properly calibrated and this resulted in one adjusting screw being utterly destroyed; it was stuck at almost the bottommost point of the thread and it was quite impossible to move it. That carb (rear) is as good...