Alfa Romeo Forums banner

brakes

  1. Stelvio QF Brake Chirping/Clicking sound

    Stelvio
    Hi All, I recently purchased a pre-owned/exec driven 2019 Stelvio QF about 14k km's and I freaking love it. However, it has a major annoyance with the CCB's - they chirp/click on brake at low speeds almost all the time from front left wheel(right wheel some times) unless I modulate the brake...
  2. 1987 Quad Spider brake issues

    Spider - 105 & 115 Series (1966-1994)
    Hi.. I pulled this low mile spider out of storage to get back to excellent running shape. The front calipers were sticking, so had them rebuilt. When I reinstalled them, the brakes felt pretty good, but not amazing. (I have an 86 Quad as well to compare). I noticed a fluid drop, and looked...
  3. For Sale Brand new Stainless Brake Lines for GTV6

    Alfa Romeo Parts For Sale & Wanted
    Sold: Brand new Stainless Brake Lines for GTV6 Item sold! thx everyone. My mistake is your gain. Mistakenly ordered these, then threw away packaging before I realized I didn't need them, so I can't return them to Centerline. They sell for $82.75 @ Centerline. I'm selling them for $45...
  4. 1961 sprint veloce parking brake

    Car Restoration
    Hello everyone, I'm restoring a 1961 giulietta sprint veloce. I'm currently have issues with the parking brake system. It's to my understanding that the veloce had a different/altered backing plate as well as cables and floor mounts to make the system operate. My issue, I can't find any...
  5. For Sale Original Giulia Super 105-series front brake set (standing pedal version)

    Alfa Romeo Parts For Sale & Wanted
    For sale: Original Giulia 1600 Super front brake set, standing pedal version Set consists of: 2x ATE 2-pot front brake calipers On the one calipers it says ATE R38 (I think, outer side) / ... (can't read it, inner side) and on the other caliper is says ATE 173 (outer side) / 24 (inner side)...
  6. heavy "knock " on hard brake peddle press GTV2000 1971

    Suspension, Steering, Brakes, Wheels & Tires
    Hi, I am now out of ideas trying to solve a very heavy metallic "knock" when I press the brakes hard and quick. If the car is rolling (slow or quick) there is the loud "knock" if i press hard and quick, if it's stationary there is no noise at all. The car drives very well and brakes ok...
  7. Berlina 2000 brake issues..

    Suspension, Steering, Brakes, Wheels & Tires
    Hi, Can anyone confirm my suspicions before I fork out £350 for a new Master Cylinder... My Berlina 2000 RHD brakes were at the bottom of the pedal travel and not very effective OK to stop but not in a hurry.. so i have stripped the front calipers and installed new piston seals and dust seals...
  8. Performance Brakes for S3 Spider 1987

    Spider - 105 & 115 Series (1966-1994)
    Hey everyone! So recently I have put in a full sport/race suspension build (Koni), full race exhaust, chassis stiffener, W rated tires/new rims, and other little things. However, it has come to my attention that my brakes lack modern standards, as they are still stock. I was wondering if any...
  9. 2007 automatic transmission no dip stick and grinding noise

    Gearbox, Transaxle, Differential & Propshaft
    Hello everyone, I hope everyone is having a fine day. i have a few questions that i cant find the answer to easily. I own a 2007 sport-wagon with a 2.4 JTDM engine and automatic transmission. i had the transmission/ differential serviced about 5 months ago by Alfa here in Germany. last week...
  10. Brake lines on my 77 Spider

    Suspension, Steering, Brakes, Wheels & Tires
    I bought the brake line kit from centerline but when I received it, it appeared that the kit isn't right for my car. I know centerline is good with their parts so I am wondering if my car isn't a stock setup. The lines on my car are as follows. 1. Master cylinder bottom hole to front driver...
  11. Alfa Romeo 159 TBi rear brake pad and disc replacement guide

    Suspension, Steering, Brakes, Wheels & Tires
    Hi, After frustrating myself trying to find info on the subject task, and fumbling my way through the job, I created a guide to help others. It's attached as a pdf document - no photos, I'm afraid, but it should make sense. If anyone has better info or advice, please post it & I can amend the...
  12. Another 3.2 GTA engine on a GTV6

    Milano/75 (1985-1993)
    I'm working in adapt this engine on my car. Althought everyone knows what we should do for adapt this engine, I preferred to modify the auxiliary components of the car and not change parts as the thermostat, the upper engine support, etc. Right now, my main problem is the flywheel. This is...
  13. Replacing Montreal Brake Lines

    Alfa Romeo Montreal
    All, I am underway with my front end rebuilding to include: 1. New BMW 7 series 4-pot calipers 2. All new bushings 3. Replace brake lines All the demo work is done and now I am ready to start swapping old for new. My issue is on the brake lines. I am trying to replace the cracked rubber...
  14. Brake suggestions

    Spider - 105 & 115 Series (1966-1994)
    Since I'm rebuilding my front brake system, any suggestions on a brake product from Rock auto here: 1988 ALFA ROMEO SPIDER Brake Pad I'm leaning towards the Ferrodo's just because I saw IAP also sells them, just for more money, but I don't know much about brake types. Just that they exist...
  15. Rotors do not spin equally?

    Spider - 105 & 115 Series (1966-1994)
    I pulled off the wheels, and calipers and brakes. When I spin the two front rotors separately with the calipers removed, one of them makes a rubbing noise and comes to a halt much faster than the other. Could this be a bad wheel bearing or is there something else? Thanks, Rich 88 Spider
  16. Rear brake brass union - has seals or not?

    Spider - 105 & 115 Series (1966-1994)
    Alfisti: I was trying to replace the rear brake hose on my '71 Spider, and since all was grimy back there, I removed all components, including the brass union that is mounted on the differential housing, and to get rid of the grease, I soaked it in paint thinner. Then, I looked inside, and in...
  17. Brake Bleeding

    Spider - 105 & 115 Series (1966-1994)
    Today I bleed my brakes for the first time. The old fluid was a dark brown and I would loose braking power after a few hard stops. The pedal before the bleed was always a little low and it seemed that I should have a bit more braking power. There was about a 1.5" dead zone that did nothing...
  18. For Sale Milano Platinum LSD Transaxle

    Alfa Romeo Parts For Sale & Wanted
    Milano Platinum transaxle with limited slip differential. LSD pack set for more lock-up than stock, but fine for street. Includes clutch and rear brakes. 4.10 ratio. Good synchros. Has GTV6 shift mechanism in place of Alfa's isostatic "thing". $399 plus shipping. In New Orleans area...
  19. I can't catch a brake (yes, I spelled it right)

    164 & 168 (1991-1995)
    Bought Sylvia in late December...a Christmas gift to me. Spent most of Christmas break doing all the servicing: - Timing belt - Cam seals (bad leak here....Steve's puller tool, a plumbing flange was essential) - Plugs, wires, cap/rotor - Fuel filter/air filter - Coolant sensor, coolant flush -...
  20. M/C repair kit availability ATE ??

    Spider - 105 & 115 Series (1966-1994)
    Hello all, Wondering if anyone has a source for MC rebuild kits for a Duetto 67 -early ATE without booster, single circuit master cylinder. Centerline does not list and IAP says discontinued since 2010. their solution is to buy an entire new MC. Not the solution I was looking for. Any...
Top