Alfa Romeo Forums banner
bearing
1-6 of 8 Results
  1. 164 & 168 (1991-1995)
    Hi, Have been having a clonk from the front end of a 1995 24v 3.0 164, UK spec. It mostly happened on steering inputs but not always. No play in front suspension bushes and even changed the engine mounts - were shot anyway. Think narrowed it down to the front strut lower bearing so took the...
  2. 164 & 168 (1991-1995)
    hello, I have and 93 twin spark fl, the main shaft bearing has some play, is it possible to change the bearing without opening the gearbox casing? I have an spare gearbox from an older model ts(the one with distributors), does anyone know if the gearboxes are interchangeable.
  3. 164 & 168 (1991-1995)
    Hi, In the process of dropping new pivot bearings into the serpentine belt tensioner for a 3.0 24v 164. Got two new bearings, OD20mm, HK1414RS, and went to push the old ones out today only to realise they sit in a 21mm OD sleeve. Can't think of any way of pushing the old bearings out of this...
  4. Alfa Romeo Parts For Sale & Wanted
    Alfa Romeo Main Crank Bearing Sets (most of them are NEW) Let me know which one's you'll need and I'll let you know the price. (805) 241-0250. - Giulietta 750-101 - Gtv - Spider Best, Bruno
  5. 164 & 168 (1991-1995)
    Quick question for the alfa romeo experts. I recently replaced the rear hubs on a '91 164s, but now the ABS light comes on intermittently? I ordered the hubs from international auto parts, and they said these hubs were the proper application for the vehicle. Also, while the light is off, the...
  6. 164 & 168 (1991-1995)
    Greetings, My 164 was screeching when shifting into gears, so have decided to replace it with a new clutch kit. The kit came with 3 components, Disc, Pressure Plate, and T/O Brg. Read here that I should also replace a ball bearing to the new overload roller bearing. Where could I purchase...
1-6 of 8 Results
Top