Alfa Romeo Forums banner

Search results

1-16 of 16 Results
Advanced Search
  1. Type 105 Parts interchangablity

    Suspension, Steering, Brakes, Wheels & Tires
    Thank you for the confirmation! Thus I can get a head start on my Project Regards Johann
  2. Type 105 Parts interchangablity

    Suspension, Steering, Brakes, Wheels & Tires
    To all the experienced Type 105 owners I want to get a head start on my Giulia project’s suspension (prepare & spray painting) without taking the suspension apart at this stage, so when the time comes I can just fit the renovated parts. I have spare Bertone suspension parts eg lower...
  3. A couple of Measurements Please...

    Suspension, Steering, Brakes, Wheels & Tires
    Hi there I measured the requested distance as 132mm. However I have never came across a spring plate which have slotted holes. Must say my experience is limited to R/H driver cars. While we are on the topic of spring plates. On which side sits the deeper of the two spring plates for R/H...
  4. Help Needed

    Car Restoration
    Thanks Jim G! At least there is only one left to ID
  5. Tranny Synchro Life Extension

    Gearbox, Transaxle, Differential & Propshaft
    Over the years I have learn to use my fingers to shift and not my hand (palm) - Doing it this way nothing can be forced which is also a reason for damaging a box
  6. 105 Speedo drive ratios

    Gearbox, Transaxle, Differential & Propshaft
    Thanks both of you for the information. Ranz thank you for the information on the oil feed - I will make sure that I will put in with the right orientation. Also thanks for the link Spiderseries4 - I will save that for future reference Wishing you all a fantastic Alfa year
  7. 105 Speedo drive ratios

    Gearbox, Transaxle, Differential & Propshaft
    Hi there There has been a thread or two touching on the subject of the different speedo drive gears to match specific final drive ratios, but with no set outcomes. I am slowly started with the recommissioning of my 1968 Giulia by refurbishing the gearbox. I am going to fit a 41:10 LSD from a...
  8. 2000 GTV.- phillips screw: size and type

    GT (1963-1977)
    By fluke I came across the info you required in an old Spare Parts Manual Door seal channel Pan head star 2.9x9.5mm The length looks a bit long, but this screw is used at a number of places - The South African assembled cars' channels were pop riveted Strangely enough the Parts Manuals doesnt...
  9. Help Needed

    Car Restoration
    Hi fellow BB members I need to tap your brains a bit. I have found the following two parts while I was sorting out my garage and it must have been part and parcel of a purchase I made some years ago. Is there anyone that can identify these parts? Body trim #105 918 and a rubber #116.00 9A...
  10. 105.36 Window Crank Escutcheon Ring Dims?

    GT (1963-1977)
    Hi there I will the dimensions of the rings work. I am busy going through my Alfa Stockpile and I know I should have some. The only problem is that I am in South Africa and the getting it there might make it a non-starter Let me know via private mail
  11. PSk's embarrassingly long restoration continues here ...

    GT (1963-1977)
    Hi Pete You have been an inspiration to me, to continue with my Bertone. (1972 2ltr) I finished the floors, the window recesses and the L/H side and then ran out of steam. I just picked up my tools after 4 years and have restarted where you are now. The the original Project started in 2005...
  12. Central Documentation Services? Update

    GT (1963-1977)
    Hi All Any updates on your requests? I would like to know how much do they charge for this service. It used to be free. Is any email address available that side step the request form Kind regards
  13. PDF test

    Testing Area
    Good day all I managed the upload of photos, but the PDF uploaded the link to the file I use the same method for both files Below is the results
  14. Fix the front screen insert- windshield.

    GT (1963-1977)
    I can not remember the exact detail, but you will not get it installed when the glass with the rubber is installed in the body. I had to remove both my screens again to fit the trim (in 1982) I think you should install it in the rubber and then work the glass in its groove.
  15. RSA Bare Metal Bertone

    GT (1963-1977)
    There are so many people here that is inspiring me! Please I need some help I have a Bertone bare metal project on which I have been sporadically been working on for a number of years. I recently decided to apply my mind to it and complete it. I have replaced the left-hand sill and fender...
  16. My love for Alfas

    New Members Introductions - Please Read
    My first encounter with Alfa was at the age of 10 - My uncle's new 1750 Bertone Series 1. Since child hood mechanical things fascinated me and at high school I started to fix cars as a hobby to fund my tool collection. I was "into" VW Beetles when I was asked my a class mate's brother to...
1-16 of 16 Results