US Spec '69 GTV Master Cylinder Problems
After installing rebuilt calipers, stainless hoses and new rotors, I attempted bleeding the brakes. I started getting good flow out the passenger rear, but then noticed a small puddle under the car. It was directly below the dual circuit master cylinder. It is leaking at the area of the plunger. Originality is paramount. This is a dual circuit system with standing pedals. Are there good rebuilders out there that can do the whole master cylinder rebuild (re-sleeve, etc)? I'm working full time and going to college full time so finding time to work on it myself is kinda hard. Recommendations? TIA.
Hey Dale I was reading through this forum and saw you thread with no replies yet. If you still are addressing this problem I would talk to Papajam....the 69 MC is his specialty and offers rebuilt units on an exchange basis.
|All times are GMT -7. The time now is 06:15 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright 2002-2011 AlfaBB.com All Rights Reserved.