Alfa Romeo Forums banner

1986 Spider Alternator pivot bolt washers

713 views 4 replies 4 participants last post by  spiderserie4 
#1 ·
Hello all. I recently took my alternator to have it bench tested. When I removed it from the car, I assembled the washers back on the bolt in shaft in the order they came off. I didn't pay attention when the testing guy removed the bolt and washers to mount the alternator on the tester. Is the order/position shown in the photo below correct? I don't see it shown in the Workshop Manual. I don't want to put the thin and thick washers in the wrong place. I'm afraid the car will explode. :wink2:

Educational comments as to the reason for thin and thick washers are welcomed.
 

Attachments

See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top