Alfa Romeo Bulletin Board & Forums - Reply to Topic
Thread: Liquid evaporator plumbing Reply to Thread
Title:
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now



In order to be able to post messages on the Alfa Romeo Bulletin Board & Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
07-30-2019 01:49 AM
divotandtralee
Quote:
Originally Posted by spiderserie4 View Post
sounds like your 'new' tank lost the vent nipple on the filler neck?

the vapour tank has 3 nipples, one at top and 2 at bottom.
top: this one has the little vent valve and goes to that hard line running along the cylinder head - that looks correct on your set up.
middle: this goes to the filler neck (on yours it goes to the tank)
bottom: goes back to tank (on yours capped off)

see post #3 here for original set up:
https://www.alfabb.com/bb/forums/spi...apor-line.html

diagram is useful too (not spider, OK, but same thing!):
Yes, the middle one is wrong .. I DON"T have the filler neck vent that I can see. The parts manual has MANY designs of the system and tanks .. some have filler vents and some don't. ... Mind boggling how many iterations there are. Everything works fine .. no fumes .. no pressure in the tank when I go to fill-up.. It is the screw type gas cap. The only PITA is getting the fuel into the tank. It takes some on-off pumping to get the tank to swallow the gas from the pump. I would lay odds it is the neck vent missing that causes the refill issue but the tank has to be vented or there would be pressure build-up when I unscrewed the cap. .. Oh Well.. onward and upward. Some things are better left alone is my attitude. Thanks for your post.
07-30-2019 01:34 AM
spiderserie4 sounds like your 'new' tank lost the vent nipple on the filler neck?

the vapour tank has 3 nipples, one at top and 2 at bottom.
top: this one has the little vent valve and goes to that hard line running along the cylinder head - that looks correct on your set up.
middle: this goes to the filler neck (on yours it goes to the tank)
bottom: goes back to tank (on yours capped off)

see post #3 here for original set up:
https://www.alfabb.com/bb/forums/spi...apor-line.html

diagram is useful too (not spider, OK, but same thing!):
07-29-2019 05:31 PM
1986velocealfa When removing the canister in my car I think the top hose went to the filler neck fitting and the bottom went to the fitting on the tank.
07-29-2019 05:01 PM
1986velocealfa I just got rid of the canister and installed a vented gas cap off a ‘65 Giulia Sprint. I installed a hose going from the tank to the fitting on the filler neck. At this point are any of these canisters still working properly?
07-29-2019 04:31 PM
divotandtralee
Liquid evaporator plumbing

My car a '73 SPICA Spider had a new fuel tank installed in it's history. Everything is operational except filling the tank is a nursing project to get gas into the tank from the pump. On further investigation, it seems the plumbing to the liquid-vapor -evaporator is askew the bottom vent fronm the L-E is capped with a rubber nipple.. Is there something going on here that needs attention? There is no filler neck vent either.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome