|Topic Review (Newest First)|
|09-02-2019 03:10 PM|
|Hodgepodge||OK, I ended up purchasing some sound deadening material and covered that with black vinyl. Looks pretty good and now I'm not worried about not finding anything that might roll under there.|
|07-21-2019 08:00 PM|
Originally Posted by pantera928 View Post
|07-21-2019 09:50 AM|
|pantera928||You might try using dynomat. It has sound deadening characteristics. Not cheap. Just cut it and it sticks to whereever you put it.|
|07-21-2019 08:48 AM|
Here's the original piece that covered the transmission tunnel around the shifter.
Not sure what to call the insulating material. Looks kinda like it might be fiberglass. But actually looks like matted golden retriever hair.
I've never found a similar looking replacement.
|07-21-2019 08:34 AM|
|velocewhippet||Here's a couple shots of the piece that's under my 67's passenger seat. Same thing on the other side.|
|07-21-2019 07:33 AM|
If you left your convertible top down and got caught by a sudden rain shower, the jute material would absorb excess rain water. The black rubber floor mats would trap water in the jute, like a greenhouse, causing corrosion to form on the floor boards. I believe this is one reason why the floors tended to rust out in our cars.
|07-19-2019 04:26 PM|
|Hodgepodge||For the solution, I just ended up cutting some black vinyl and laying it under the rubber mats, similar to what ossideseppia did. While working on the dash, I already lost some parts under there and having a smooth surface to reach under and feel around on is waaaaay easier than the alternative.|
|07-11-2019 10:55 AM|
Originally Posted by Hodgepodge View Post
|07-11-2019 06:43 AM|
|Hodgepodge||I think you may mean Jute. It is essentially the backing on carpet, without the carpet. I posted what came out of my '69 earlier. It was a combination sound deadening and wterproofing material. I think there are better products today, but you can still find the stuff if you want to be completely accurate in a restoration.|
|07-11-2019 06:38 AM|
Originally Posted by not2old4toys View Post
I believe that the stuff is available from auto upholstery suppliers. But, it won't have the tar stuff on it.
The screws, fender washers and snaps for the rubber mats are all that are holding the sound insulation in my car.
|07-11-2019 05:30 AM|
|Hodgepodge||The template idea is an excellent one. I happen to have a couple of rubber cargo mats that would work perfectly for that. Thanks!|
|07-10-2019 09:45 AM|
The original sound deadening under the seat for 1966-67 was a thin fiber pad that was covered with a rubber/tar substance. The shape is similar to the one shown by Brian, with the exception it was sort of a inverted "T" shape. It did not cover the areas on the outside of the seat rail standards. It was not adhered to the floor, but it escapes me as to if it was screwed down or laying loose. The front sound deadening was a mix of fiber and tar that was spread over the floor likely in a liquid or self adhering form.
|07-10-2019 06:50 AM|
|ossodiseppia||Here are the pictures I have. I'm sorry for the poor scans and dust.|
|07-10-2019 05:33 AM|
As with most cars of this age, you'rs is missing some bits.
In the nineties, I had the chance to examine a fairly well preserved 1600 Spider. The insulation on the firewall and the transmission hump were all covered with vinyl. The insulation on the floor was missing probably due to some water damage. My thought is that the insulation on the floor also has/had vinyl covering it.
So. I made patterns with paper board for the insulation. Then, I glued some vinyl on top of it. Your car should have a rubber mat that covers the area in front of the parcel shelf such that when the seat back or seat is pushed forward, very little of the vinyl is exposed.
|07-10-2019 01:12 AM|
There should be a big piece that covers both sides and goes over the tunnel.
Sent from my ONEPLUS A3000 using Tapatalk
|This thread has more than 15 replies. Click here to review the whole thread.|