|Topic Review (Newest First)|
|06-23-2019 07:48 PM|
Thanks for the reply Gary. I use superbright quite a bit, but they didn't have a 4-pin relay. They had a 3- and 5- version, but said they were thinking about offering a 4-pin unit sometime in the future. I think the 3-pin unit you sent the link for is made by the same company in Malta.
P.S. Madison, Wisconsin!! Dang I love that place.
|06-23-2019 06:48 PM|
Just saw this thread.
Sorry you had so much trouble sourcing a flasher.
When I converted my S2 to LED taillights and turn signals, I sourced the flashers from SuperbrightLED.
I think these are the same as the ones you obtained.
|06-23-2019 04:35 PM|
|abeasley||Thanks again Kurt! It works great!|
|06-23-2019 01:08 PM|
LED flasher relay
Just wanted to follow-up on this thread from a couple of months ago. I wanted to convert the signal/brake lights on my S4 to LED without using resistors, etc., so I tried working with Simtek on the electronic flasher spiderserie4 had found, but this distributor proved to be useless (lots of promises, but zero follow through). Some google-sleuthing discovered the manufacturer for this relay was a company in Malta. I contacted them and their original response was that Alfa wasnít one of their supported brands, but since it listed this particular flasher relay as a substitute for the Lucas sfb163 which is frequently listed as a substitute for Spiders of that era, it might be worth a try. I tried to place an order, but then the mfg said the relay was a very poor seller and they didnít have anyÖÖ.
Making a long story short (and cutting out a rash of emails), they offered to build a few examples since they still had the parts, so I ordered 6 of them. There were special setup charges, and customs/shipping fees, but it still came out to be less than the standard S4 replacement relays online.
The units arrived and they worked as advertised (see attached pics). Tried it first with the regular incandescent bulbs still installed and it worked fine. Replaced everything with LEDs and still worked as promised. Nice bright directional and emergency lighting front and back. No resistors wired in.
Two things were a little different: 1) The signal cadence was quicker than the orig electo-mechanical version (but on par with the fully electronic signal cadence of the late model Mazda the Spider shares the garage with), and 2) zero clicking/signal sound since itís fully electronic. abeasley offered to be an experimenter and his experience seems to be the same.
If anyone is interested, I can supply the contact information. I also still have 3 examples of the relay that one can buy at cost ($30/ea delivered, or $20 if you leave near Los Gatos, CA and want to pick up). Iím selling at cost as I offer no warranty Ė although Iím not sure if the manufacturer offers one anyway on these units.
|04-23-2019 07:30 PM|
Well, that proves it was exactly the relay you need!
|04-23-2019 04:44 PM|
Unfortunately that supplier won't be able to get those flashers in... They sent me this email:
Unfortunately we have no stock of this part currently and our supplier has an open-ended lead time on them.
Therefore, with regret, we need to cancel and refund your order.
Sorry for any inconvenience caused.
|04-20-2019 07:01 AM|
|abeasley||I placed an order yesterday and hopefully it'll ship this coming week. I have an order confirmation but nothing else, I figured they were probably closed by then for the weekend.|
|04-20-2019 06:33 AM|
Unfortunately, your humble correspondent hasn't discovered the secret handshake to get the relay's UK producer to ship me any. I contacted the company that spiderserie4 had found that produced a LED enabled relay that looks spot on for S3/S4 spiders. If it worked as advertised in would be a good deal too, as minus VAT, it would run about 16-17USD (before shipment cost).
But Simtek only ships direct from a web order within the UK. Outside of it, you have to request a purchase quote, which I did. I also asked it the relay was a replacement for the 4-pin units in later series Alfa Spiders -- and that's where things are hung up. They won't ship until they can verify it's a match (input/outputs). We're in a cycle where I ping them every 3-4 days, and they respond quickly apologizing and letting me know they'll get to it in 1-2 days. But the cycle continues. Probably a one-off order to the U.S. isn't ringing any sales bells (I did note to them if it works there would likely be other interested parties). I also offered to just take the risk and plug one in if they'd send it to me, and if the car burst into flames, that would be my problem -- but still no dice.
Anyway, at this point abeasley has offered to request purchase quote for a couple of units w/o mentioning the word 'alfa' (the relay was used by multiple euro car brands back in the day, but I don't know what brands Simtek considers 'tested'). The other option could be if there is any UK-living, Alfa-loving members reading this string and want to help, let me know. An internal UK order looks relatively simple.
So that a long response to a quick bump of curiosity. Now, it's out to de-weed the yard.
|04-19-2019 08:26 PM|
Originally Posted by abeasley View Post
|04-11-2019 11:19 PM|
Originally Posted by Dbaliko View Post
|04-10-2019 06:28 PM|
Originally Posted by ossodiseppia View Post
|04-10-2019 04:15 PM|
|kugu||Nada. I will ping them again tomorrow if there is nothing in the morning.|
|04-10-2019 03:52 PM|
Have you heard anything back about the UK Flasher relay? I'm interested to see if that will work.
|04-06-2019 11:50 AM|
|kugu||Just a follow up on the UK flasher relay for LED signals. The company responded and said Alfas weren't on their list of applications, but they agreed the pin placement looked correct. They asked for the pin labeling (input/output) on the unit itself. I sent what I could find online and on AlfaBB, and said they'd check it out and advise next week.|
|04-05-2019 02:28 PM|
That looks correct. The prong labeling looks decent as well. Thanks for finding this -- it was a different UK company than I had tried earlier.
It's cheap enough to just give it a whirl, but you can't order directly from outside the UK. You have to get a quote. I'll ask for a quote for 1 and see what they say :-).
|This thread has more than 15 replies. Click here to review the whole thread.|