|Topic Review (Newest First)|
|11-29-2018 06:06 AM|
|divotandtralee||Got you covered...Hope these help. Have a vintage year. By the way the Giulia manual calls for double nutting with a 6 mm nut on all four of these by the count they say... to add to the mysteries of Alfa. and the 48mm was changed to 50 mm...go with the flow.|
|11-28-2018 08:30 PM|
|11-28-2018 08:47 AM|
|divotandtralee||Send me the address again|
|11-27-2018 06:21 PM|
|11-27-2018 02:49 PM|
|divotandtralee||Ok.. got it... what kind of nuts?|
|11-27-2018 02:30 PM|
Originally Posted by divotandtralee View Post
Threaded section is 25mm.
|11-27-2018 05:12 AM|
|divotandtralee||Ulf, it sounds like you have one side covered.. I have an assortment but need the actual breakdown of each bolt ... i.e. how much bare shank and how much thread for each. ?|
|11-27-2018 03:53 AM|
According to the AR standard parts catalog, 2120.20046 is a normal 8mm nut, and 2120.20070 is a 6mm thin nut.
|11-26-2018 04:09 PM|
|11-26-2018 01:39 PM|
|divotandtralee||I've seen them both ways too .. I suspect the skinnier ones were used when sandwiching a bracket like you are looking at for the flex line and the nuts maybe doubled up. Just a guess.|
|11-26-2018 01:10 PM|
I am converting from discs back to original drums and missing these bolts completely.
BTW, Were original 10x1 nuts 8mm or 6mm thick?
I have both in my stash of extra hardware.
|11-26-2018 07:41 AM|
|divotandtralee||Somehow I suspect you have the bolts and they aren't marked 'LOBO".... not to fret.. Many were not marked LOBO but are of equal visual quality..|
|11-25-2018 09:30 AM|
Front Brake Hardware (LOBO Bolts) 750/101
Looking for original LOBO hardware for Front Brake Backing Plate to Spindle/Steering Arm on 1957 Giulietta Spider Veloce.
Qty 2 - 10 x 1 x 25mm Bolt (P/N 2100.02748)
Qty 1 - 10 x 1 x 48mm Bolt (P/N 2100.02757)
Qty 1 - 10 x 1 x 60mm Bolt (P/N 2100.02760)
Qty 4 - 10 x 1 Nut (P/N 2120.20070 or 2120.20046)
Qty 8 - 10.4mm Lock Washer (P/N 2140.17257)