I'm back!! Several months ago i ended a thread due to repeated delays and total frustration. I ended up dumping the original parts and crew, regrouped, and am now back with a vengence
Since then i've assembled a team just as dedicated as i am to bring my spider to fruition. Not only that, but everything has gone up several notches. The beast that will be powering my spider now will be one very, very nasty..
164 based
3.7 Litre
24 Valve
V6 Monster
Here are some highlights:
Brand-new, long-stroke, 3.2 litre 156/147 GTA crank and bearings
6 indivdual throttle boddies
GoTech PRO fully-programmable, stand-alone engine management system
Ross Racing aluminium-alloy pistons...ect
That power plant will result in just over 300 HP at the wheels!!
No bulges, extra vents or flares!! Nothing to give away all that power. Mated to that beast will be the 5 speed, 105 tranny - laced up with all new internals including close ratio and lightened gears (shafts, syncros..everything new) Then finishing off with the taller rear end of the automatic spider.
All the torque is going to be incredible and avalible down low in the rev range. Therefore, major body supports will be in place to keep it straight.
Thanks to "junglejustice" aka John at Glenwood Motors out of South Africa. The time you spent on the phone with me going over all my options, quick email replys and outstanding development of my engine was second to none. Respect bro
This bad boy is slated to be completed for spring 07. There will be more mods to come and I'll be updating this thread as more work develops for all interested.
Regards,
streetfame
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Since then i've assembled a team just as dedicated as i am to bring my spider to fruition. Not only that, but everything has gone up several notches. The beast that will be powering my spider now will be one very, very nasty..
164 based
3.7 Litre
24 Valve
V6 Monster
Here are some highlights:
Brand-new, long-stroke, 3.2 litre 156/147 GTA crank and bearings
6 indivdual throttle boddies
GoTech PRO fully-programmable, stand-alone engine management system
Ross Racing aluminium-alloy pistons...ect
That power plant will result in just over 300 HP at the wheels!!
No bulges, extra vents or flares!! Nothing to give away all that power. Mated to that beast will be the 5 speed, 105 tranny - laced up with all new internals including close ratio and lightened gears (shafts, syncros..everything new) Then finishing off with the taller rear end of the automatic spider.
All the torque is going to be incredible and avalible down low in the rev range. Therefore, major body supports will be in place to keep it straight.
Thanks to "junglejustice" aka John at Glenwood Motors out of South Africa. The time you spent on the phone with me going over all my options, quick email replys and outstanding development of my engine was second to none. Respect bro
This bad boy is slated to be completed for spring 07. There will be more mods to come and I'll be updating this thread as more work develops for all interested.
Regards,
streetfame
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote