|Topic Review (Newest First)|
|08-20-2019 04:25 AM|
|ossodiseppia||WOW, that's a event. Congratulations and job well done.|
|08-19-2019 08:23 PM|
Great to meet you at Concorso. Your work looks great! At the rate your going, I would expect to see you there next year. I love following your build and cant wait to see it in person.
|08-19-2019 08:01 PM|
Weight on Wheels!
After 4 days of automotive excess at Monterey, my eldest son and I were motivated to make some progress on the Duetto.
1) Fabricated a couple missing mounting tabs for mounting one of the asbestos heat shields for the exhaust.
Part of the frame rails that came off of s/n 437 didn't have the tabs.
Made the pieces and welded them on.
2) Completed the assembly of the front suspension.
3) Moved the Chassis Dolly out from under the car, and...
4) Its sitting on its own tires tonight.
|08-12-2019 05:08 PM|
They are a work of art, aren’t they?
Interesting that it was cheaper to make all these bits back then, including the cylinders, than to do hydraulic callipers.
|08-12-2019 12:02 PM|
|otteud96||Looks good! Keep up the great work. I painted my 69 ate calipers with a ceramic rattle can paint, and it looks good and it should last... good luck|
|08-12-2019 11:14 AM|
|velocewhippet||Tony at AlfaStop sent me 2 pieces that I’ve unrolled and started bending into the shape of the original ones.|
|08-12-2019 10:45 AM|
Originally Posted by velocewhippet View Post
|08-12-2019 10:33 AM|
|arswaim||Very nice job on the Dunlops! Despite the Rube Goldberg-esq design theyíre really not to bad to maintain, and fortunately they work just fine. Of course spares are significantly more expensive than spares for the Ates, but at least theyíre available. Good luck with the rest of your project!|
|08-12-2019 08:46 AM|
Dunlop Rear Brakes
I had a little extra time this past week to work on the car. My wife was off visiting her sister in Alaska, so I actually had quite a bit of extra time to spend in the garage.
So, I decided to tackle the job of re-assembling the Dunlop rear brakes. I had kinda dreaded doing this since there are so many parts. But I had my photos from before I took them apart and since they were already cleaned up and ready to re-assemble, my only difficulty was going to be having parts left over when I thought I was done.
Originally, these parts were supposably zinc plated. Didn't do that, so now they're zinc-painted. I used the rattle can stuff from Eastwood called Clear Zinc.
I can see from these photos, I've put one of the pins in from the wrong side. So, I've got to go back and fix that.
That, and I've got to bend the new hard brake lines and replace those rusty springs. Thankfully, those springs are available from AlfaStop. That's where I purchased all of my Dunlop parts.
|08-01-2019 08:25 PM|
|JessCan54||I had to look at a lot of photos but I enjoyed it. Great job!|
|07-27-2019 06:04 PM|
Originally Posted by Vivace View Post
Originally Posted by stphers View Post
Everything looked to be originally painted black except for the hinges. The 68's seat hinges were a dark silver that looked like the "hammer finished" stuff that Rustoleum sells.
Turned out, after looking closely at the 67's seats, those hinges were also originally silver.
Here's the seat bottoms of a couple of the seats - 67 seat (with rusted thru pan), 68 seat (with manufacturing date ink stamp), the silver hinge on a 68 seat (prior to refinishing)
|07-24-2019 10:12 AM|
Very nice well done ! One question, were the seat rails originally black? or silver plated?
|07-23-2019 09:32 PM|
|ossodiseppia||Wow, nice work!|
|07-23-2019 08:12 PM|
|Vivace||Those look very good! How did you treat the steel pans?|
|07-23-2019 05:24 PM|
Some updates to report on...
Used parts from my 4 seats (2 from 663438, 2 from a 1968 1750 spider) to make the best pair of seats.
Upholstery and seat foam came from Classic Alfa.
|This thread has more than 15 replies. Click here to review the whole thread.|