|Topic Review (Newest First)|
|10-30-2018 12:34 PM|
Originally Posted by Charlie DiMarco View Post
|09-26-2018 09:19 AM|
How many turns of engagement are you getting with the nuts you have ? Industry standard is 6 turns.
Use ET lug nuts to gain some tread engagement. You will have to drill your wheel seat with a 6mm or 15/64 bit to make clearance fort the extented portion of the shank.
|09-26-2018 05:30 AM|
Originally Posted by triz View Post
|09-26-2018 04:48 AM|
Originally Posted by Tom Frasca View Post
|09-26-2018 12:16 AM|
These may work give them a call, check the profile, taper, and depth ,
|09-25-2018 06:04 PM|
Wheel lug question
So my Spider came with a set of wheels and spacers. Unfortunately they cut the original studs. The spacers don't bother me, but I acquired a set of original 14" FPS 5 star wheels which I liked better. The problem is there is not enough stud that I feel comfortable to drive around with. So I need to re stud the spacers and get a proper set of lug nuts.
Anyone have the correct size and if possible a picture of the lug nuts to use?