Alfa Romeo Bulletin Board & Forums - View Profile: JoeCab

JoeCab JoeCab is offline

Supporting Vendor

  Visitor Messages

Showing Visitor Messages 1 to 10 of 11
  1. CLeopold
    06-27-2018 03:54 PM - permalink
    Do you have blue wool carpet, for 84 Spider? thanks, and please advise.
  2. alfaward
    11-30-2016 04:58 AM - permalink
    Joe, Ward here in Atlanta. I have your MF exhaust and paddle plates already. Love both. For your wheel spacers how is the fitment if I have the TRACK PACK. Im pretty low and tight on the wheel arches already. Just want to be sure I don't run into tire rub issues.

    And, do you have better ALIGNMENT specs than original? I've seen another post and just want to be sure your input is considered before I change. And if I get the spaces, any update then?

  3. Womo
    09-30-2015 06:56 PM - permalink
    Hi Joe

    Could I get an email address for Centreline so I can send a list of the trim parts I am after?


  4. RedJewel
    08-20-2015 02:45 PM - permalink
    Hi Joe
    I had contacted Centerline regarding a Veloce Airfilter Mount. I spoke to one of the staff and they mentioned that they would check with the person that fabs them and let me know. Any chance that you could source one for me?

    Here's my Wanted add:

  5. tvincenzo
    08-07-2015 05:18 PM - permalink
    Its a long shot but I'm wondering if you still have the Evo bodykit for the 75?
  6. Andretti
    01-03-2011 07:37 PM - permalink
    hi i was wondering if you had any pictures of the performance Rear Lowering Springs on the Milano. i would like to see how low 2.0" would look like
  7. bianchi1
    07-08-2010 11:46 PM - permalink
    hello. i hope you answer this is very easy/..the bellhousing if you have an extra one laying about up to no good... i need to know this.. with the motor side of the bellhousing on the floor, what id the distance from the floor to the top( where the gearbox is mounted too)? in cm's if possable.. thanks
  8. green 69 gtv
    08-08-2009 11:54 AM - permalink
    green 69 gtv
    Hi Joe. I just received one of your centerline replacement electronic ignition distributors and am having a lot of trouble installing it. The 2 teeth on the distributor shaft are a few microns larger all around compared to those on the Mirelli it is replacing. Have you ever heard of anyone having to file these teeth down a bit. I just cannot get it to seat properly. Any suggestions would help.
    Thanks, John
  9. NOBLE 309
    07-31-2009 02:43 PM - permalink
    NOBLE 309
    Doing a backdate exhaust system on a 86 spider.
    was going to get the &$ stock manafold and the magnflow system.
    But saw PH 115 header and wanted to know if you can just get the center and rear Magniflow system thx
  10. geneo
    07-16-2009 11:39 AM - permalink
    joe, since no one responded to my plea for altitude jetting info, I thought I'd go to you direct. What jets do people run at your altitudes or higher. I'm at 7000. 40 dcoe 32's, 2 liter with 8l? cams. thanks gene,,, I'm gocorp (or Olsen)in your accounts

  About Me

  • About JoeCab
  • Signature
    Centerline International - Alfa Romeo Parts & Accessories - (888) 750-ALFA


Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 07:48 PM
  • Join Date: 12-02-2002


Showing Friends 1 to 2 of 2
  • lgbalfa
    • lgbalfa is online now
    • Send a message via Skype™ to lgbalfa
  • stefmiesterb
    • stefmiesterb is online now


09:07 AM - Brooklyn67 mentioned JoeCab in post Wilwood Caliper kit - Leak Fix Recommendation
JoeCab - Thank you for the ...
08:43 AM - nizam mentioned JoeCab in post PLUM - Refreshing a Milano Verde 3.0V6
...hanks, peakay and JoeCab. That color is surp...
06:40 AM - Alex mentioned JoeCab in post Valve shim measurement tool DIASS C.1.0108
Still looking.


06:37 PM - JoeCab quoted Norseman50 in post Red Line 75W90ns Transmission Oil
Is it the consensus that the be...
06:07 PM - JoeCab quoted GV27 in post Need help with 91 Spider Exhaust
Already got yelled at to ...
06:35 PM - JoeCab quoted alfa2go in post Mirror Resilvered
Hi Joe, pretty sure the mirr...
08:41 PM - alfa2go quoted JoeCab in post Mirror Resilvered
I have been looking for a p...
05:31 PM - JoeCab quoted vf31rhill in post Quality clutch
Would it be "over the top" to ...
06:32 AM - vf31rhill quoted JoeCab in post Quality clutch
...cheaper/inferior JoeCab, Would it be "ove...
07:02 PM - JoeCab quoted 180OUT in post Quality clutch
I talked to both Sachs and ...
09:32 PM - gprocket quoted JoeCab in post Force applied by Spica TA?
The electronic Thermostatic...
08:05 PM - JoeCab quoted TerryJ in post Magnaflow forward Cat Assembly
Just curious why the 50 sta...
07:23 PM - JoeCab quoted 1981AlfaGTV6 in post Magnaflow forward Cat Assembly
They state on Centerline that the...
06:49 PM - JoeCab quoted chairmankaga in post What could happen if the O2 sensor wire grounds against the body?
For the sake of argument, what's ...
06:30 PM - JoeCab quoted Alfar7 in post Red Line 75W90ns Transmission Oil
The viscosity of the 75-140...
07:43 PM - JoeCab quoted 1969read in post anyone know the model name/number for our Verde Recaro seats?
I bought some from Italy a fe...
07:10 PM - JoeCab quoted alfaparticle in post Milano Clutch Removal
Hi Rob, That clutch came out of ...
07:10 PM - JoeCab quoted Tom F2 in post Koni Red Shock Absorber Adjustment
I always understood that th...
For the best viewing experience please update your browser to Google Chrome