Alfa Romeo Bulletin Board & Forums - View Profile: 750sprint

750sprint 750sprint is offline

Registered User

  Visitor Messages

Showing Visitor Messages 1 to 7 of 7
  1. HUD
    06-27-2016 07:14 PM - permalink
    Hi Vern,

    maybe???? got find the time!
  2. user459
    11-21-2015 04:38 AM - permalink

    The Pal nuts I have are 1/2 - 20 thread, 3/4" hex head. They are stamped and plated lock nuts. They are not sized as metric, but they don't seem to know the difference! I used trial and error to order boxes of these and to some up with acceptable substitutes. They fit M12 - 1.5 and M12 -1.25 threads equally well. I found that they work well and are a match for those used on suspension components. They can easily be black oxide coated and oiled.

    I did not find a match for the 10mm Palnuts. I have a few originals, but not enough to make up the dozen you require and leave me with spares. Also, I found that there are two different 10mm Palnuts. One is 14mm hex head and the other 17mm hex head.

    If you'd like, I can send the 4 12mm palnuts.

  3. zzarchi
    07-18-2015 08:41 AM - permalink
    hello VERN,
    mine is pre 700 and it is a real VERDE CHIARO combo.
    the interior is unrestored.
    So, if you need help please feel free to ask.
  4. millstoneman
    04-23-2014 06:38 PM - permalink
    I tested my thermostat for my 58 veloce spider. I monitored the temp when fully opened @ 200 degrees f. Should this open beforehand and might this lead to overheating? It starts to open slightly at 185-190 and only fully opens at 200 degrees.
  5. dennist
    03-09-2014 09:40 PM - permalink
    Vern, need 8 right hand tightening but possibily 16 if available. Are you in Roseburg? Thanks
  6. gjk69alfa
    02-26-2013 01:47 PM - permalink
    Vern, I am seeking the 'side spear"section for the door. I have the remaining 5 pieces. I think we have spoken before.

  7. hotlegs32
    10-16-2012 10:44 AM - permalink
    I have a column shift tunnel case transmission and a few other bits. I don't have the steering column lever. I will have to see what other pieces I have in my parts.You can contact me at [email protected]

  About Me

  • About 750sprint


Total Posts
Visitor Messages
General Information
  • Last Activity: 09-23-2019 09:40 AM
  • Join Date: 01-24-2010


    1955 Alfa Romeo Giulietta Sprint
    1955 Alfa Romeo Giulietta Sprint
    1958 Alfa Romeo Giulietta Spider
    1958 Alfa Romeo Giulietta Spider
    1959 Alfa Romeo 750 Giulietta Sprint Veloce
    1959 Alfa Romeo 750 Giulietta Sprint Veloce


No results to display...


07:31 PM - phila3885 quoted 750sprint in post 1958 Fiat 1200 Spider TV
Phil, Any chance you might ...
11:44 PM - tubut quoted 750sprint in post AR Register
The AFRA sponsored and Italian...
03:17 PM - concept 101 quoted 750sprint in post Photos of engine compartments only
Dennis, The first 600 or so...
02:24 PM - concept 101 quoted 750sprint in post Photos of engine compartments only
Dennis, The first 600 or so p...
02:00 PM - concept 101 quoted 750sprint in post Photos of engine compartments only
Pictures of my 1955 Sprint eng...
12:38 PM - hjjensen quoted 750sprint in post 750 Giulietta Spider parts
Hans, What are you asking for...
11:05 AM - clescn quoted 750sprint in post Windshield wiper nut size (thread and pitch) attached to wiper actuating mechanism
Nick, It would help if you li...
08:43 AM - divotandtralee quoted 750sprint in post Carello front turn lamps
bump Vern you can buy complet...
05:27 PM - Chris1750 quoted 750sprint in post Fuse Sizing
Anyone found where fuse size i...

  Likes Received

  1. Monti77
  2. LaurandSteve
  3. pathung
  4. parthmer80877
  5. zzarchi
  6. zzarchi
  7. Chi Si Dici
    Chi Si Dici liked post by 750sprint On thread : Giulietta Door Panel Inserts
For the best viewing experience please update your browser to Google Chrome