Alfa Romeo Bulletin Board & Forums - View Profile: Biba69

Biba69 Biba69 is offline

Registered User

  Visitor Messages

Showing Visitor Messages 1 to 1 of 1
  1. sidewaysalfa
    10-05-2010 03:17 PM - permalink
    sidewaysalfa
    re: oil leak
    We may also be comparing oil leaks. Mine seems to be coming from the bottom of the alternator!!! But I also have some oil up to the A/C compressor bracket and back along the driver's side inner fender (inside engine compartment).
    Upon looking at motors at Santo's he says the 2l motor leaks around the front case just above the long alternator bolt area. I tightened a few bolts in that area: h20 pump, pan and front cover bolts and cleaned the entire area. I also removed the oil filter and think I saw a little ding in the rubber gasket. But this leak has been with me for a few years.
    Today is the first day I am driving the Alfetta to see where any new oil comes from.
    Stay tuned,
    pb

  About Me

  • About Biba69
    Biography
    Own a restoration company
    Location
    Irwindale, CA USA
    Interests
    Restoring Alfas, mostly '69 Spiders
    Occupation
    Restoring Alfas, mostly '69 Spiders
  • Signature
    Biba

    AlfaCyberSite.com
    BibaRestorations.com

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 10:07 AM
  • Join Date: 04-12-2005

  Friends

Showing Friends 1 to 3 of 3
  • Anfanuts
    • Anfanuts is online now
    • Send a message via Skype™ to Anfanuts
  • Cali67Duetto
    • Cali67Duetto is offline
  • lgbalfa
    • lgbalfa is offline
    • Send a message via Skype™ to lgbalfa

  Mentions

No results to display...

  Quotes

06-01-2019
12:07 PM - NMS quoted Biba69 in post Weber vacuum take off
Geese-Louise! It's not a vi...
03-07-2019
06:44 PM - Gubi quoted Biba69 in post 123ignition distributor - 15000 miles road test
In spite of the green light...
02-28-2019
09:44 AM - 6alfas quoted Biba69 in post Giulietta Tool Roll
The number is 50145. So if ...
08:21 AM - 6alfas quoted Biba69 in post Giulietta Tool Roll
Regarding ten–eight mm wren...
02-27-2019
06:53 PM - 6alfas quoted Biba69 in post Giulietta Tool Roll
Regarding ten–eight mm wren...
02-10-2019
12:25 PM - AlfistiSA quoted Biba69 in post Help with body VIN
Thanks again. I forgot to m...
07:29 AM - Barn101 quoted Biba69 in post Help with body VIN
...side of each box. Biba69, I know the feeling ...
12-06-2018
06:10 PM - Craig_m67 quoted Biba69 in post Alfa Spider project: Engine refresh completed!
Why hasn't anyone asked abo...
09-12-2018
07:05 AM - concept 101 quoted Biba69 in post Giulietta Tool Roll
concept101 - How about tell...
09-07-2018
11:59 AM - concept 101 quoted Biba69 in post Giulietta Tool Roll
The best I can figure is yo...
08-27-2018
07:07 PM - 6alfas quoted Biba69 in post Giulietta Tool Roll
Not asking for sympathy, ju...
07-06-2018
02:02 PM - DPeterson3 quoted Biba69 in post Matching numbers
I'm rather surprised this t...
07-03-2018
03:03 PM - Tom Frasca quoted Biba69 in post Matching numbers
I have a persistent person ...
06-20-2018
03:09 PM - jarrington quoted Biba69 in post '58 Spider Veloce some assembly required
jarrington, I visited BaT a...
06-19-2018
06:47 PM - Vivace quoted Biba69 in post '58 Spider Veloce some assembly required
That was not my original se...
05-13-2018
11:26 AM - tubut quoted Biba69 in post Staying connected
Is this a Mac / Firefox pro...
05-11-2018
12:03 PM - tubut quoted Biba69 in post Weber 45 carbs for 2600 Spider
Am I correct that the origi...
05:46 AM - Tom Frasca quoted Biba69 in post Weber 45 carbs for 2600 Spider
Bora1978, unfortunately it ...
12-26-2017
07:56 PM - tubut quoted Biba69 in post 2600 Touring Spider generator & starter rebuilders:
The 2600 is probably simila...
12-11-2017
01:25 PM - spiderserie4 quoted Biba69 in post Anyone Purchased Seat Belts from Biba
Should anyone here have a s...
 
For the best viewing experience please update your browser to Google Chrome