Alfa Romeo Bulletin Board & Forums - View Profile: Alfajay
Platinum SubscriberModerator

Alfajay Alfajay is offline


  Visitor Messages

Showing Visitor Messages 1 to 9 of 9
  1. Yachtman
    02-21-2019 12:33 PM - permalink
    He'll also need the torque # and recommended type of washer on the inside of the manifold, holding the mounts, but I don't recall what they were and I can't find the post.
  2. Gordon Raymond
    08-29-2018 08:45 AM - permalink
    Gordon Raymond
    Hi Jay,
    Please contact me at <[email protected]>.
    Gordon Raymond
  3. uptheorg
    07-01-2014 06:16 PM - permalink
    Hi, I am looking at a 1958 Sprint Coupe being sold by Symbolic Motors in San Diego. I am contacting you to see if you or someone you can recommend would be able to perform a competent PPI on the car since I live in NY and will have to buy the car sight unseen if I go for it. The listing on their website makes it look really excellent, including underside photos -- you can start by going there: 1958 Sprint Coupe for Sale
  4. cabikefreak
    05-02-2014 10:10 PM - permalink
    Thank you Jay! I keep finding more stuff and the guy I was going to use is good but doesn't have an in-house welder and is unfamiliar with Alfas. So your reference is going to be put to good use! I am indeed a bike nut but the bad news is I'm having a lot of neck and back troubles that are slowing me down. Regardless meeting another bike guy and trading old stories will be good. Thank you again for the reference!

  5. cabikefreak
    04-26-2014 04:44 PM - permalink

    With the welding that is going to be needed on my car I am considering looking for someone to do that before I take the car to the paint shop. The paint guy I am planning to use doesn't have a full time metalsmith on site but he has a guy who comes in when needed. I haven't met him but I am thinking he likely doesn't have Alfa experience. So I either go to a full service shop that does it all, which I'm thinking is going to be even more expensive, or I find a metal specialist. Might you have some recommendations here in OC or Inland Empire or LA if I have to go that far? Thank you very much Jay!
  6. Gustie83
    12-12-2013 01:56 PM - permalink
    Alfajay: Thanks for the advice. Being in Rochester Minnesota I called around and found it a challenge to find someone locally to change out a head gasket. A few mechanics are willing to take it on as a winter project. I might try your suggestion first.
  7. green 69 gtv
    07-18-2012 08:50 AM - permalink
    green 69 gtv
    Thanks Jay (re-exhaust). I don't want to derail the thread anymore than I have. When I replaced my old ANSA exhaust with the stock system (from the connection with the header all the way back) I had (have) a real problem with the front hangar (off the transmission)--as if the front section of the exhaust wants to hang lower than is possible, and this gets even worse for the rear section. I'll try your suggestion of readjusting the connection between front and rear sections.

  8. bianchi1
    08-08-2011 10:40 PM - permalink
    just a note, on the vw dizzy, it won't fit, but you know that but.................. a dizzy of an bmw 320i up to 1979 will fit.. after that 1980 and later,it turns the wrong way the 1979 and earlyer turns the right way( clockwise)
  9. Ricardino
    09-03-2009 09:32 AM - permalink
    Hi Jay,

    I hope you are well. I'm stuck on an electrical issue with my 67gtv and thought you'd be the best person to talk to for advice.

    Can I call you sometime?
    Thousand Oaks

  About Me

  • About Alfajay
    I built a hotrod from a 30 Ford and a smallblock Chevy back when I was 14, and the rest, as they say, is history
    San Juan Capistrano
    Restoring Alfas, maintaining Alfas, driving Alfas, etc.
  • Signature
    Jay Mackro
    San Juan Capistrano, CA

    '63 Guilia spider
    '65 Guilia Sprint GT
    '67 Duetto
    '91 164L


Total Posts
Visitor Messages
General Information
  • Last Activity: Today 07:40 PM
  • Join Date: 01-25-2005


11:25 AM - pennzo mentioned Alfajay in post My 1st Alfa!....and it's a Spider!
Alfajay, Thank you for your ...
01:18 AM - Toli0815 mentioned Alfajay in post Horn comes on when I switch my lights on
...f luxurious thingy Alfajay: the horn is perfect...
05:33 AM - Toli0815 mentioned Alfajay in post Horn comes on when I switch my lights on
Dear Andrew, & Alfajay, Thanks to both for...


07:05 PM - Alfajay quoted sstrublic in post Considering an 87 Spider - Worth it?
Im going to take the plunge. ...
06:59 PM - Alfajay quoted Gordon Raymond in post 2019 Genesis G70 Trim Levels
Not sure what Ad-Min is doing here....
05:14 PM - 6alfas quoted Alfajay in post Defective Giubo?
6alfas: Are you aware that y...
02:32 PM - Alfajay quoted 1978alfa in post Defective Giubo?
I had to force it on with a p...
09:34 AM - Alfajay quoted sstrublic in post Considering an 87 Spider - Worth it?
I think the front suspension i...
08:22 AM - Alfajay quoted ossodiseppia in post
08:09 AM - Alfajay quoted ghnl in post
07:46 AM - Alfajay quoted Rob Heroux in post Clarification needed 1750 GTV
it came with an auxiliary (afte...
07:25 PM - ghnl quoted Alfajay in post
04:39 PM - Alfajay quoted ghnl in post
07:51 AM - ossodiseppia quoted Alfajay in post
07:07 AM - Alfajay quoted pacpal in post 1967 Duetto Bootlid
Thanks you for posting the ...
06:59 AM - Alfajay quoted ossodiseppia in post
07:56 PM - Alfajay quoted snippyw in post Giulia Spider Veloce lighter refresh
Care to post a link? Probab...
07:51 PM - Alfajay quoted ERathmann in post 105 front spindle
I tried heating and pressing i...
08:06 AM - Alfajay quoted Crowbar44 in post Spica Blanking Plate
I could always make one out of...
07:31 AM - ossodiseppia quoted Alfajay in post
06:47 AM - Alfajay quoted Crowbar44 in post Spica Blanking Plate
So this is what's sitting in m...
06:41 AM - Alfajay quoted ossodiseppia in post
09:52 PM - Alfajay quoted kcabpilot in post Newbie Head Job
...toast. Holy smoke, kcabpilot is right - those cam...
For the best viewing experience please update your browser to Google Chrome