Alfa Romeo Bulletin Board & Forums - View Profile: Evgeny 164

Evgeny 164 Evgeny 164 is offline

Registered User

  Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. Evgeny 164
    07-26-2017 10:05 AM - permalink
    Evgeny 164
    Hi, Peter!
    Works great. The engine already 500 000 km works with this bolt. I have a tension bearing, another. The diameter is slightly larger. This is because of the not real price for these parts. I change the belt and the bearing, after 40-50000 km. Because the force on the belt is permanent. The other two bearings I change after 100-120000 km.
    For serpentine belt bearing original. The tensioner I use from BMW its dimensions are the same but the partnumber is different. Perhaps it has another effort. It has a spring and oil inside. Nevertheless, it performs its functions perfectly and is available for purchase.
    P.S.
    Rubber bushings in poor condition. I'll find what to replace them, I just wanted to do it earlier, if I knew the size.
    The most interesting thing is that the 166 compressor is simply screwed to the engine without these bushes.
  2. beeton
    07-26-2017 04:46 AM - permalink
    beeton
    Evgeny 164. Am I correct in thinking you have replaced your 164 (timing) oil tensioner with a long bolt? How is it working? Just looking at options. Also, is there such a manoeuvre for the accessory belt oil tensioner as well?
    P.S. Before throwing out a rubber bushing, if cracked but not too worn, consider filling the gaps with polyurethane. I did this on my upper engine mounts. Ther were showing some cracks but not brittle. Seems to be fine.
    Thanks

    Peter
    Beeton, Canada
  3. Evgeny 164
    01-11-2014 10:31 AM - permalink
    Evgeny 164
    Please, I think that 164 (it's not a Ferrari) is still - great price.$ 200 is the maximum limit, this tensioner.
  4. kuseetha
    01-11-2014 08:24 AM - permalink
    kuseetha
    http://www.alfabb.com/bb/forums/164-...ml#post5092330

    I just want to personally thank you for sharing this information. Thank you so much!

  About Me

  • About Evgeny 164
    Location
    Russian Federation
  • Signature
    Alfetta 2.0 ,76 Ex / Alfa 75 2.0 TS,91 Ex
    Alfa 164 3.0 24V Super,95 / Alfa MITO 1.4 ,09

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 11:25 PM
  • Join Date: 11-19-2006

  Mentions

No results to display...

  Quotes

05-31-2019
10:42 PM - Evgeny 164 quoted richardbradford in post 164 24v serpentine tensioner pivot rebuild
Hi, what was the BMW part your bough...
06:09 PM - richardbradford quoted Evgeny 164 in post 164 24v serpentine tensioner pivot rebuild
Somehow I have a "burst." I put...
05-11-2019
06:17 AM - Evgeny 164 quoted beeton in post 164 24v serpentine tensioner pivot rebuild
Were the bearings changed b...
04-12-2019
02:32 AM - Evgeny 164 quoted potenza24v in post Upgrading from 12V to 24V
I wrote "not impossible" = poss...
03-14-2019
06:36 AM - 164 addict quoted Evgeny 164 in post Chain tensioner bolt SNAPPED!
Yes. The chain tensioner mecha...
02-08-2019
02:20 PM - Michael Smith quoted Evgeny 164 in post 164 24v 1995 3.0 head gasket change
Oh, ;)) sorry, yes, of course a...
06:30 AM - Michael Smith quoted Evgeny 164 in post 164 24v 1995 3.0 head gasket change
I do not understand you. Torqu...
12:23 AM - Evgeny 164 quoted richardbradford in post 164 24v 1995 3.0 head gasket change
Good to know, thanks, but at what di...
02-07-2019
12:43 PM - richardbradford quoted Evgeny 164 in post 164 24v 1995 3.0 head gasket change
There is one rule: do not tight...
11-06-2018
09:06 PM - Evgeny 164 quoted RexCars in post front strut boot alternative
These are the strut bearings...
10-11-2018
08:32 AM - Alfissimo Int. quoted Evgeny 164 in post 164 intake air hose
It all depends on the price.:wi...
10-09-2018
08:12 PM - Alfissimo Int. quoted Evgeny 164 in post 164 intake air hose
My intake hose, which I bought ...
08-28-2018
03:25 AM - Aggie57 quoted Evgeny 164 in post Admitting defeat
Well said. Nothing in this ter...
12-12-2017
07:49 AM - Lost quoted Evgeny 164 in post Another 24v timing belt change.
Belt replace uniquely. DAYCO 9...
12-07-2017
10:13 PM - Evgeny 164 quoted Alfissimo Int. in post Experiment with serpantin belt
too bad you can't place the alterna...
10-31-2017
01:34 AM - Headstar24 quoted Evgeny 164 in post Headstar24 asks question we can answer
This is a difficult question. ...
10-01-2017
12:06 AM - Evgeny 164 quoted richardbradford in post 164 24v clutch and flywheel change
Hi, Do you mean you are resting the...
09-30-2017
02:52 PM - richardbradford quoted Evgeny 164 in post 164 24v clutch and flywheel change
I'm doing this alone. It is nec...
09-08-2017
08:51 AM - Evgeny 164 quoted bruce1976spider in post What did you do Alfa related today?
Engine bay fire??? The piston ha...
08:44 AM - Evgeny 164 quoted Glenn Innes in post What did you do Alfa related today?
Fisrt time i have seen an alfa p...
 
For the best viewing experience please update your browser to Google Chrome