For Sale Various Weber, Dellorto and Solex carbs - plus manifolds and ancillaries - Alfa Romeo Bulletin Board & Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 18 (permalink) Old 05-26-2010, 09:30 AM Thread Starter
Registered User
 
Alex's Avatar
 
Join Date: Jan 2005
Location: London UK
Posts: 5,963
Various Weber, Dellorto and Solex carbs - plus manifolds and ancillaries

I have a fairly large quantity of Weber, Solex, Dellorto and Zenith carbs for sale, with various manifolds and linkages etc. All of the carbs will need vapour blasting and rebuilding, or in some cases to yield parts. Some are non-Alfa, see the last photo.

First photo
Solex C40 DHE (pair) with filter base, plus one extra base
Solex C40 ADDHE (pair), part number 11650.04.010.03
Solex C40 DDH (pair), part number 10548.04.010.08
'Euro' inlet manifold (in as-new condition) with NOS thermostat and two NOS housings, part number 10500.07.300.00 and NOS one-way vacuum valve. Has not been blasted so it retains its original semi-shiny cast finish. An excellent item. *NOW SOLD*

Second photo
Dellorto DHLA 40 (6 pairs), some lids/floats missing.

Third photo
Weber 32 DIR61
Weber 32 DIR71
Solex C32 EIES
Solex C32 EIES with manifold
Dellorto DRLA 36S (4 units)
Various inlet manifolds and throttle linkages

Fourth photo
Solex (France) 40 PAIO-5A, for Land Rover S2
Zenith 32 IF7, for Renault 4 and others
Holley (made under licence by Weber) 30 DIC 11-1H, for Fiat?
Weber side draught (type illegible) with manifold marked 'Fiat 124B'

I will need to send these out in individual packages to get below the 2kg limit. Inviting offers by PM or email for all of the above.

Cheers,

Alex.
Attached Images
     

[FONT="Georgia"][/FONT]
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
to all parts I have advertised on the BB so far. Plenty more! Just ask.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by Alex; 04-26-2016 at 04:48 AM.
Alex is offline  
Sponsored Links
Advertisement
 
post #2 of 18 (permalink) Old 05-26-2010, 11:15 PM
Registered User
 
Join Date: May 2010
Location: Coquitlam, BC, Canada
Posts: 663
Have you got anything to set up a 2600 engine? E mail me at [email protected]
stphers is offline  
post #3 of 18 (permalink) Old 05-26-2010, 11:26 PM Thread Starter
Registered User
 
Alex's Avatar
 
Join Date: Jan 2005
Location: London UK
Posts: 5,963
No, sorry. I have a set of 102-series big end bearings and possibly some rings, but that's about it.

[FONT="Georgia"][/FONT]
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
to all parts I have advertised on the BB so far. Plenty more! Just ask.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Alex is offline  
Sponsored Links
Advertisement
 
post #4 of 18 (permalink) Old 05-26-2010, 11:44 PM
Registered User
 
Join Date: May 2010
Location: Coquitlam, BC, Canada
Posts: 663
Have you ever seen a weber set up for a 2600 engine? I am curios as to what I might be getting myself into.

Thanks, Rick
stphers is offline  
post #5 of 18 (permalink) Old 05-26-2010, 11:50 PM Thread Starter
Registered User
 
Alex's Avatar
 
Join Date: Jan 2005
Location: London UK
Posts: 5,963
Plenty of info on the BB, just do a search.

[FONT="Georgia"][/FONT]
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
to all parts I have advertised on the BB so far. Plenty more! Just ask.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Alex is offline  
post #6 of 18 (permalink) Old 05-27-2010, 12:33 AM Thread Starter
Registered User
 
Alex's Avatar
 
Join Date: Jan 2005
Location: London UK
Posts: 5,963
Every carb conversion I have seen for the 2600 involves an adapted inlet manifold and airbox, and three Webers. I'm not saying that three Dellortos will not work, it's just that I've never seen it done.

In any case, Dellorto carbs actually make for a better road engine owing to a more refined progression circuit. But Weber always had the better marketing ...

[FONT="Georgia"][/FONT]
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
to all parts I have advertised on the BB so far. Plenty more! Just ask.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Alex is offline  
post #7 of 18 (permalink) Old 05-27-2010, 08:41 AM
Registered User
 
Join Date: May 2010
Location: Coquitlam, BC, Canada
Posts: 663
Do you know what kind of carbs would be required for this conversion?

Thanks, Rick
stphers is offline  
post #8 of 18 (permalink) Old 09-05-2010, 08:37 PM
Registered User
 
Join Date: Sep 2010
Posts: 8
Hello Alex,
Would youhappen to have one Dellorto DHLA 40 carb for sale?. I need one to complete a set of 3.
Thanks,
Edgar
F1gigafan is offline  
post #9 of 18 (permalink) Old 09-09-2010, 01:49 PM
Registered User
 
Join Date: Sep 2010
Posts: 1
30dic11

Hi Alex,

Do you still have the 30DIC11 ?
If so , can you send me quote?
regards

Wilfred
wdkinder is offline  
post #10 of 18 (permalink) Old 09-24-2014, 06:32 AM Thread Starter
Registered User
 
Alex's Avatar
 
Join Date: Jan 2005
Location: London UK
Posts: 5,963
Bump! Most of these are still available, and I am open to offers - with the exception of the inlet manifold (with all its NOS goodies) and spare air plenum base.

[FONT="Georgia"][/FONT]
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
to all parts I have advertised on the BB so far. Plenty more! Just ask.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Alex is offline  
post #11 of 18 (permalink) Old 11-01-2014, 06:55 PM
Registered User
 
Join Date: Mar 2014
Location: Brooklyn
Posts: 80
Dellorto set

Hi Alex,

I was restoring my DHLA 40 H carbs and noticed a jammed pressure intake screw. I tried to drill it out, which obviously didn't work 'cause I'm contacting you I have all the components, so I just really need a body. The other carburetor came out great. Basically, I'd like to buy a match set with nothing jammed. I need a set with 5 progression holes, so DHLA or DHLA H. What would that cost? I live in New York, US.

Talk to you soon,

Fernando
Brklynfbm is offline  
post #12 of 18 (permalink) Old 11-03-2014, 03:54 AM
Senior Member
Gold Subscriber
 
Join Date: Oct 2007
Location: kent england
Posts: 371
hi alex I have been sending messages for weeks about the dellorto carb have had no replies,what is the problem?
chris hedley is offline  
post #13 of 18 (permalink) Old 11-12-2014, 05:11 PM
Senior Member
Gold Subscriber
 
1alfanatic's Avatar
 
Join Date: Jan 2007
Location: Astoria Oregon
Posts: 856
Solex addhe

Same here, Sent PM but no response. Interested in Solex C40 ADDHE Carbs, Jetted for 2.0ltr. Dell Ortos possible. [email protected] Oregon
1alfanatic is offline  
post #14 of 18 (permalink) Old 11-12-2014, 11:11 PM Thread Starter
Registered User
 
Alex's Avatar
 
Join Date: Jan 2005
Location: London UK
Posts: 5,963
Chris - it appears that I only have one Dellorto without a suffix mark.

Bob - have not had the chance to look yet, as these are stored 30 miles away. Might have the chance to do so this weekend.

Apologies to both, it's been a busy couple of weeks.

[FONT="Georgia"][/FONT]
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
to all parts I have advertised on the BB so far. Plenty more! Just ask.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Alex is offline  
post #15 of 18 (permalink) Old 11-17-2014, 03:30 AM
Senior Member
Gold Subscriber
 
Join Date: Oct 2007
Location: kent england
Posts: 371
hi alex I only want one. thanks chris
chris hedley is offline  
Reply

Tags
alex, parts

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Alfa Romeo Bulletin Board & Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome