For Sale Trade for cool alfa or other etceterini? Snap on box and tools - Alfa Romeo Bulletin Board & Forums
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old 08-19-2010, 07:42 AM Thread Starter
Registered User
Join Date: Jul 2005
Location: Connecticut
Posts: 22
Trade for cool alfa or other etceterini? Snap on box and tools

For sale or trade: I have a nice collection of Snap-On tools and toolbox I bought from a friend that is really just duplicate stuff for me. I am looking to trade for an interesting project car or complete car, running, non running, etc. I can trade up or down depending on the car in question, let me know what you have. I'd also sell for cash obviously, but trades are more fun. Ideal cars would be Alfa Romeo GTV, Lancia Fulvia, BMW 2002, Porsche 911, Datsun 510, but really anything from before the mid 70's and Foreign is what I love. Get in touch if you have something to offer. If you've always wanted a nice set of tools and toolbox that you can acquire for cents on the dollar without having to finance or fork over cash for, while at the same time getting your wife or folks off your back and simultaneously clearing out the garage, look over the following:

Pix here: cannot make images work...[email protected]/4907080657/in/photostream/

and here[email protected]/4907080817/in/photostream/

Snap on tool box, KRA2411PCM Blue, standard configuration. Excellent condition, minor nicks, not new but in great condition, no dents but some minor scuffs. New Retail is $4300 for the box.

Link to Specs:

The tools are for the most part "used" because you are not getting them from Snap-On, but functionally, they are all in as new condition, most in the original cases, and you will put more wear on them in a week than they currently have now. Prices are new retail just for comparison of what purchasing the tools new would cost. The box and Snap-On tools alone new would cost more than $7000.00 new. I did not break out prices on the cheaper tools, they are what they are. Thanks, Matt

Snap on hand tools included:


Flank Drive Plus Combination Wrench Set, Snap on part number SOEXM710, 10 pc. All from 10mm-19mm, 12 point, standard length, retail price is $320.00

Flank Drive Plus Combination Wrench set, Snap on part number OEXM710B 11pc, 8, 10- 19mm, OEXM710B, short lenght, retail price is $288.00

3/8" drive socket set, 6pt, shallow, Snap on part number is 212FSMY, 8-19mm, Snap on retail price is $150.00

Long Box Wrenches 8/9, 10/11, 12/13, 14/15, 17/19 18/20, Snap on part number XDHM606 retail price is $281.00

Flare Wrenches Metric, 3pc 12/12, 13/14, 15/17, each wrench is appx. $40.00 new.

Single Flank drive plus 18mm Extra long Flank Drive wrench, OEXLM18B, Snap on retail price is $57.00

E-Z Red (Sold through Snap-On) Flexible nonreversible ratcheting spline drive wrench set, 5pc 8/10, 12/14, 13/15, 16/18, 17/19, appx $100 for the set.

Torx driver set, 3/8" drive, T8, T10, T15, T20, T25, T27, T30,T40, T45, T47, T50, T55 and long T55. Snap on part number 212EFTXY, Snap On retail is $291.00

Standard Tools :

Flank Drive Plus 12 point wrench set, 7pc, standard length 3/8, 7/16, , 9/16, 5/8, 11/16, .
Snap on part number is SOEX707, retail price is $197.00

non flank drive wrench, long

Flare Wrench, 1pc, 9/16

Air tool: 3/8" Air ratchet, FAR 72C, lightly used. Snap on retail is $491.00

Torque Wrench, 3/8" Drive, Model TQFR100B, Calibrated 9/22/09, Used but good condition, new retail is $257.00

3/8" Cordless Impact Gun, Kit CT 561, new, includes two batteries and case, Snap On retail is $226.00

Deadblow Hammers, used but in good condition, HBFE32 and HBFE24, Snap on retail for the two would be appx. $110.00.

Non Snap-On Tools:

Gear Wrench Sets, barely used, in original cases

Metric, 12pc Long, includes all between 8-19mm

SAE, 8pc Long, 3/16, 3/8, 7/16, , 9/16, 5/8, 11/16,

Other Tools:


Central Pneumatics " Shallow Impact set, 10-27 mm excluding 20, 23, 24, 25

GP Brand 3/8 Impact swivel sockets, 10 pc, all sizes from 10-19mm

GP Brand " Impact swivel sockets, 12 pc, all sizes from 12-24mm

" Impact, Deep, partial set, 10, 13, 14, 21, 22, 24, 27, 30, 32

Unknown Brand " impact sockets, 32, 32 and 36mm

Pittsburgh Wrenches, 11pc, 10, 11, 12, 13, 14, 15, 19, 21, 22, 24, 26

Three "thumb ratchets" , 3/8 and "

3/8" Swivel ratchet


Wright " Shallow Impact 12 pc, 7/16, , 9/16, 5/8, 11/16, , 13/16, 7/8, 1, 1 and 1/16

Kobalt impact sockets, 7/8" and 1"

Pittsburgh Wrenches, SAE, 11pc, 3/8, 7/16, 5/8, 11/16, , 13/16, 7/8, 15/16, 1", 1 and 1/16, 1 and

3/8" Stubby ratchet kit, includes tamper proof torx bits, as well as E10, E12, E14 and E16 Torx bits

9pc Metric 3/8 Allen Set, 4, 5, 6, 7, 8, 10, 12, 14, 17

Gentech OBDII Scanner, Model 98614 with case and manual
Matt McGinn is offline  
Sponsored Links
post #2 of 2 (permalink) Old 08-22-2010, 02:28 PM
Registered User
Join Date: Aug 2010
Posts: 16

Hi Matt,
I have a 1987 spider poject car with a 3L 164S motor and ZF 5 speed. I have about $8000 into it. It needs a distributor and the Dual relay set is giving me trouble. I am located in Mass.
Ernie93 is offline  

Quick Reply

Register Now

In order to be able to post messages on the Alfa Romeo Bulletin Board & Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

For the best viewing experience please update your browser to Google Chrome