Alfa Romeo Bulletin Board & Forums - View Single Post - Weber tuning with Lambda sensor
View Single Post
post #155 of (permalink) Old 08-14-2019, 06:49 PM
Senior Member
Platinum Subscriber
alfaparticle's Avatar
Join Date: Oct 2004
Location: Columbia SC
Posts: 12,796
Idling is not influenced by anything in the emulsion tube stack. I have always ended up using the smallest MJ/AC combo that makes correct AFR at high power and does not go grossly lean anywhere else, but I have not used F11 tubes.
I did almost all of my testing in 3rd gear uphill. When I had found the best setup I did a final run in 4th. Sometimes it went a bit lean at the top and I had to drop a size or two in AC's.
You should do a test run in January to make sure that you are not tending lean.

Ed Prytherch
79 Spider
76 Suzuki GT500
2011 Jaguar XKR

A little government and a little luck are necessary in life, but only a fool trusts either of them. - P.J. O'Rourke

Last edited by alfaparticle; 08-14-2019 at 06:52 PM.
alfaparticle is online now  
For the best viewing experience please update your browser to Google Chrome