Alfa Romeo Bulletin Board & Forums - View Single Post - Mig with Gas. See weld. Opinions.
View Single Post
post #6 of (permalink) Old 06-02-2019, 01:43 AM
PSk
Registered User
 
Join Date: May 2003
Location: Tauranga New Zealand
Posts: 11,404
Send a message via AIM to PSk Send a message via Yahoo to PSk
Turn it up until if you pull the trigger for ~1 second you blow a hole in the metal. Then either turn it down slightly, or learn to pull the trigger for less than a second.

In thin sheet metal you weld by tacking, not running beads. Eventually your tacks join and the joint is welded.

If you weld like 3mm plus thick you can keep the trigger pulled and push a long seam weld and it should look like this ...🙂
Pete
Attached Images
 

'71 1750 Series 2 GTV:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
156 Series 1 v6 ... and remember it's all just opinions
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
PSk is online now  
 
 
For the best viewing experience please update your browser to Google Chrome