Alfa Romeo Bulletin Board & Forums - View Single Post - 67 Duetto 663438 Restoration
View Single Post
post #131 of (permalink) Old 04-14-2019, 10:22 PM Thread Starter
velocewhippet
Senior Member
Gold Subscriber
 
velocewhippet's Avatar
 
Join Date: Jun 2007
Location: Washington State, USA
Posts: 259
Quote:
Originally Posted by arswaim View Post
Would you mind sharing the dimensions of the bump stop if you still have them? Iím about to try to fabricate a replacement for the missing right hand one on my Duetto and donít quite trust the measurements Iíve taken from the left side.

Thanks,
Alex
No problem.
This is the quick sketch I put together when I measured the one remaining bump stop I had.
I didn't include the dimension of the flange at the top, but it was probably about 5 inches in diameter.

Don't make the diameter of the cone any larger than 3.75 inches at the top. Otherwise the spring seat won't fit.

Jeff
Attached Images
 
velocewhippet is offline  
 
 
For the best viewing experience please update your browser to Google Chrome