Join Date: Mar 2018
Location: Atlantic Highlands, NJ
I was just thinking, that the total width of the car would be important, given the air filter housing is attached to the inner fender, so maybe they are NOT all the same. Now I am curious if Alfa assigned different part numbers, or did they "scrunch" up or stretch out one part as required? I'm showing "101.21.08.101.01, HOSE, intake duct to filter", but no dimensions. I have to believe the Duetto hose would be very close, but where do you find a Duetto hose?
I dug out the two ratty examples I have and the centerline is about 2" longer than the original. Maybe the remanfacturers suffer from bridge engineer syndrome and figure just a little longer is better than a bit too short and each "generation" grows by an inch or so. Wish I could be of more help.