Alfa Romeo Bulletin Board & Forums - View Single Post - US Spec '69 GTV Master Cylinder Problems
View Single Post
post #1 of (permalink) Old 04-05-2009, 03:39 PM Thread Starter
Dale
Registered User
 
Dale's Avatar
 
Join Date: Oct 2003
Location: Summerville, South Carolina
Posts: 458
US Spec '69 GTV Master Cylinder Problems

After installing rebuilt calipers, stainless hoses and new rotors, I attempted bleeding the brakes. I started getting good flow out the passenger rear, but then noticed a small puddle under the car. It was directly below the dual circuit master cylinder. It is leaking at the area of the plunger. Originality is paramount. This is a dual circuit system with standing pedals. Are there good rebuilders out there that can do the whole master cylinder rebuild (re-sleeve, etc)? I'm working full time and going to college full time so finding time to work on it myself is kinda hard. Recommendations? TIA.

Dale Thomas - 1969 1750 GTV
Summerville, South Carolina

Last edited by Dale; 04-05-2009 at 05:48 PM.
Dale is offline  
 
 
For the best viewing experience please update your browser to Google Chrome