Alfa Romeo Bulletin Board & Forums - View Single Post - How to change oil on Giulietta Spider?
View Single Post
post #11 of (permalink) Old 05-05-2014, 07:37 PM
Registered User
Join Date: Apr 2012
Posts: 193
how to change oil on giulietta spider

Hello Group.

The drain plug is a 14 mm hex. must have one of these to change the oil.

I also add zinc to the oil - can be purchased at most auto parts stores.

like uncle Rick - I too wait to change the o-ring gasket for the filter. I believe the NAPA filter has the correct o-ring. once the filter is replaced and engine started - make sure there are no leaks - if a leak occurs - most likely the canister is not fully in place. this is an easy mistake to make.

use a new copper gasket for the drain plug - or use hylomar to seal the oil copper gasket.

RWCearley is offline  
For the best viewing experience please update your browser to Google Chrome