Alfa Romeo Bulletin Board & Forums - View Single Post - Flaminia CoupĚ -the Bugatti-Wagen-
View Single Post
post #57 of (permalink) Old 01-26-2014, 04:22 AM Thread Starter
Tedesco
improving
Platinum Subscriber
 
Tedesco's Avatar
 
Join Date: Jan 2013
Location: Wuppertal
Posts: 329
Garage
Richard, the measured length difference is to the very tip end of the wing, right below the lights.

The "seat" of the light seems to have been put in place angled. Besides the rough work I can not find any creases or bends on the neighbour panels, especially the rear center panel appears straight.

The right side also looks quite rough although not as bad as the left. The spare wing is manufactured in a much better way.

There is a small angle at the right side, too. Maybe that had been straightened by filler. Consequently the next step would be to set up an auxiliary longitudinal center line of the body shell and check the position of both rear ends.

I will find out how the position of the lights is at the other Coupť.

Hubert
Attached Images
    


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Flaminia GT 3C, Flaminia Convertibile 3C, Flavia Convertibile 1.8, A112 Abarth, Flaminia Coupť 2.5, Fulvia Sport 1.3S, Unimog U900

Last edited by Tedesco; 01-26-2014 at 04:31 AM.
Tedesco is offline  
 
 
For the best viewing experience please update your browser to Google Chrome