My 164 3.0 V6 Super (24v) had its timing belt broken at 19,000km and all 24 valves were bent.
Found out that the bearings were rough and mostly the oil vapors from cam cover seals did the disaster. I wish to replace all the faulty parts but I couldn't really find a thread which mentions the parts I need to check and/or replace. My current list goes as follows:
1. Intake valves - 12 nos
2. Exhaust valves - 12 nos
3. Intake valve guides - 12 nos
4. Exhaust valve guides - 12 nos
5. Timing Belt, 3 Idlers, 1 Tensioner
6. Cam cover gaskets/seals - 2 nos
7. Head Gaskets - 2 nos
Could you please help me with the list of items I should check? Or any advice? Highly anticipating your support
Thank you very much.