Cruise control stalk collar. - Alfa Romeo Bulletin Board & Forums
 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 08-12-2015, 01:13 AM Thread Starter
pkr
Registered User
 
Join Date: Aug 2013
Location: UK
Posts: 4
Cruise control stalk collar.

Hi,

If someone has a 164 cruise control stalk collar lying around
could you do me a favour and measure it for me?

Just the arrowed bit here -


I need the overall diameter, thickness and recess depth ( I appreciate that that is not going to happen if it is fitted to the car! ) and if a radius gauge is available ( that's a bit of a long shot I know! ) the radius of the outer edge. The primary measurements I need though are the overall diameter and thickness.

Reason? I want to fit cruise control to my 1997 GTV ( which was never even an option on the car throughout its production history ) and as with everything I do to my car I want it to look as if it was put there by the factory. As the wipers/lights control stalks are essentially identical to those in the 164, the 164 cruise stalk is the obvious choice to me. To that end, I have purchased the Rostra 250-3304 which appears to be the same as the 164 cruise stalk

http://www.rostra.com/images/2503304/2503304-small.jpg

To make my installation look more 'factory' I want to make a replica of the 164 collar to finish it off neatly.

Thanks.
pkr is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 08-12-2015, 05:48 AM
Senior Member
Platinum Subscriber
 
Alfisto Steve's Avatar
 
Join Date: Dec 2003
Location: VB, VA
Posts: 26,682
Garage
Looks like you have the collar already on the stalk or is that just a picture of somebody elses?

Ciao, Alfisto Steve
Lakeland, Florida
Virginia Beach, Virginia
AROC 164 Tech Advisor

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Maintenance Sticky:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Alfa Semi-Daily driver: USA model - BB2 1991 164S Black Beauty II ALFISTO [U]

[U] BB1 1991 164L w/S engine and A/T now excess to inventory [U]

Daily driver and parts hauler but not car hauler 2004 Jeep Grand Cherokee Overland 4.7L H.O. V-8

"A day without an Alfa whine is like a day without sunshine"
Alfisto Steve is offline  
post #3 of 7 (permalink) Old 08-12-2015, 05:56 AM Thread Starter
pkr
Registered User
 
Join Date: Aug 2013
Location: UK
Posts: 4
It's just a picture I've saved whilst thinking about this - but I cannot remember where from. It'll be taken down as soon as I have an answer as it is not mine.

I did mean to add that in my original post.
pkr is offline  
Sponsored Links
Advertisement
 
post #4 of 7 (permalink) Old 08-12-2015, 06:11 AM
Senior Member
Platinum Subscriber
 
Alfisto Steve's Avatar
 
Join Date: Dec 2003
Location: VB, VA
Posts: 26,682
Garage
Looks like the part number of it is 60557835.

Ciao, Alfisto Steve
Lakeland, Florida
Virginia Beach, Virginia
AROC 164 Tech Advisor

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Maintenance Sticky:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Alfa Semi-Daily driver: USA model - BB2 1991 164S Black Beauty II ALFISTO [U]

[U] BB1 1991 164L w/S engine and A/T now excess to inventory [U]

Daily driver and parts hauler but not car hauler 2004 Jeep Grand Cherokee Overland 4.7L H.O. V-8

"A day without an Alfa whine is like a day without sunshine"
Alfisto Steve is offline  
post #5 of 7 (permalink) Old 08-12-2015, 07:47 AM Thread Starter
pkr
Registered User
 
Join Date: Aug 2013
Location: UK
Posts: 4
I think that is the washer that goes under the fastening nut inside the cowl. You can sort of see the collar on the stalk in the parts diagram.

FIAT ePER
pkr is offline  
post #6 of 7 (permalink) Old 08-14-2015, 03:43 PM
Registered User
 
ANDYM's Avatar
 
Join Date: Oct 2011
Location: Pacific NW
Posts: 273
This what you're looking for??

Overall diameter: 1.179"
Overall thickness: 0.256"
Flange thickness: 0.149"
Recess depth: 0.081"
Attached Images
   

Andy M
Red '91 164S and Black '91 164S
ANDYM is offline  
post #7 of 7 (permalink) Old 08-15-2015, 07:12 AM Thread Starter
pkr
Registered User
 
Join Date: Aug 2013
Location: UK
Posts: 4
That's fantastic, thank you very much.

I have a lump of aluminium bar which should be arriving Monday. So I'll be sticking that in the lathe soon after.

Again, many thanks.
pkr is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Alfa Romeo Bulletin Board & Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome