
05-30-2007, 09:09 PM
|
 |
Registered User
|
|
Join Date: May 2007
Location: Memphis, TN
Posts: 54
|
|
|
noise at high rpms in 1,2,3 gear
I just drove the 89 spider veloce I purchased for the first time. (yes I know. you didn't drive it before you bought it? long story) In 1st, 2nd, and 3rd when I get to high rpms it sounds as if something is rattiling or loose, almost like an out of balance drive shaft. The guy I bought it from said that this is a common problem with these cars and never bothered to fix it. He said it was a syncro problem but this doesn't really make since to me since the car is already in gear when it does it and shifts fine. The car only has 40,000 miles on it. Any ideas? I don't know a lot about these cars. obviously 
|

05-31-2007, 03:00 PM
|
 |
Registered User
|
|
Join Date: Aug 2004
Location: CO
Posts: 894
|
|
|
I think an out-of-balance shaft you would also feel. I have had exaust baffling that was nocked loose in old muffler rattle at high rpm. I doubt you would be able to hear a syncro problem unless gears were grinding but that would be a diferent noise and throughout the rev band I would think.?.? It sounds like something is lust loose and vibrating.?.?
|

05-31-2007, 08:55 PM
|
 |
Senior Member
|
|
Join Date: Nov 2006
Location: Waterdown, Ontario
Posts: 261
|
|
Quote:
Originally Posted by dasouthwon
I just drove the 89 spider veloce I purchased for the first time. (yes I know. you didn't drive it before you bought it? long story) In 1st, 2nd, and 3rd when I get to high rpms it sounds as if something is rattiling or loose, almost like an out of balance drive shaft. The guy I bought it from said that this is a common problem with these cars and never bothered to fix it. He said it was a syncro problem but this doesn't really make since to me since the car is already in gear when it does it and shifts fine. The car only has 40,000 miles on it. Any ideas? I don't know a lot about these cars. obviously 
|
I have the same problem. I put her up on jacks and it sounds like its coming from the middle muffler. Sounds like something inside of that muffler is rattling around. Taking her to muffler man first.
Last edited by Vintre; 05-31-2007 at 08:58 PM.
|

05-31-2007, 09:05 PM
|
 |
In the Spiders' nest...
|
|
Join Date: Jun 2005
Location: Nutley/NJ & Middletown/OH, USA
Posts: 4,861
|
|
Quote:
Originally Posted by dasouthwon
I just drove the 89 spider veloce I purchased for the first time. (yes I know. you didn't drive it before you bought it? long story) In 1st, 2nd, and 3rd when I get to high rpms it sounds as if something is rattiling or loose, almost like an out of balance drive shaft. The guy I bought it from said that this is a common problem with these cars and never bothered to fix it. He said it was a syncro problem but this doesn't really make since to me since the car is already in gear when it does it and shifts fine. The car only has 40,000 miles on it. Any ideas? I don't know a lot about these cars. obviously 
|
It's very difficult to diagnose something like this on the BB... If you are new, I would strongly suggest that you find a good Alfa mechanic, and use him until you feel you are coming up to speed (which could be very quick). I mean, by paying for an hour of labor to at least find out what is going on, you could avoid a much more costly problem. The BB has many examples of people not detecting things in time, and then suffering as a consequence...
Best regards,
__________________
Enrique
Spider 74, 84 & 87
164 93L & 95Q
Milano 88 Verde
|

05-31-2007, 09:19 PM
|
 |
Registered User
|
|
Join Date: May 2007
Location: Memphis, TN
Posts: 54
|
|
|
I drove it after work tonight and it sounds and kind of feels like it may be a slipping clutch. I think this problem would most likely be present at the bottom end of the rpm range but its not. I'm thinking possibly out of balance driveshaft or bad cv joint. I'll crawl underneath this weekend to see what I can find.
|

07-20-2007, 03:45 PM
|
|
Registered User
|
|
Join Date: Feb 2007
Location: fairfax, VA
Posts: 9
|
|
|
if it only happens in first three gears problem may be cluster gear bearings, does it make the noise in 5th gear? $th gear is direct drive and there is no load on the cluster gear bearings. also make sure there is oil in the trans.
Pete in Va
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|