NEEDED, Power Mirror Switch!

astro4prez · #1 (**permalink**) 05-08-2008, 10:28 AM

I'm desparate here. Does anyone have the round housing and switch that will fit my 88 Grad? I'm begging someone to find me a source or a parts car.
Thanks,
Brian

Bob Sacamano · #2 (**permalink**) 05-08-2008, 10:32 AM

If you don't already have a spare from a dead switch, make certain the switch you get (if used) has that little selector ring for adjusting the left or right mirror.

**AlfaTango1** · #3 (**permalink**) 05-08-2008, 10:43 AM

It's the same switch as a GTV6 if that makes your search any easier.

**papajam** · #4 (**permalink**) 05-08-2008, 10:56 AM

Have have dibs on the mirror switch in this thread but it was to be an on the shelf spare. If you need it so your mirrors will work, you can have it. Just let me know.

astro4prez · #5 (**permalink**) 05-08-2008, 10:57 AM

There are six wires going into the back side of it. I had someone send me photos from a 90. I hope it is the same as the GTV6 though, that should certainly help.
Thanks for the info.

astro4prez · #6 (**permalink**) 05-08-2008, 11:01 AM

Yes I do. Mine imploded while I was reattaching the shift boot to the back of the console. Now my battery is dead and I suspect that there is a constant drain internally.

**RayKiszely** · #7 (**permalink**) 05-08-2008, 12:03 PM

Brian:
Just got a note from PapaJam about your need. I have one from an '87 and it is fine. I'm asking $45 plus shipping. PM me with your regular e-mail etc. if interested.
Thanks
Ray

mjono53 · #8 (**permalink**) 05-08-2008, 12:38 PM

Hey Brian,
I've got one from a 90' Spider, identical to above pic,in previous post. Make me an offer!
Plus shipping. It's used but works. Just removed from my own Spider. The car came with a spare and it looked a little nicer that the one already in it. So I swapped em out.
Mike