Mater clutch cilinder

ellert · #1 (**permalink**) 04-27-2008, 07:14 PM

Hi Guy´s

I´m new to this BB and new to Alfas . I have recently bought a 69 roundtail
US version and now the clutch started leaking and looking for rebuild sets for Bonaldi, I find that they give two (2) different sizes for the bore, anyone know whitch size for the US models.

Elio Comello · #2 (**permalink**) 04-27-2008, 07:29 PM

Both IAP and Centerline show only one MC for the 69. Give them a call.

Welcome to AlfaBB bro'!

Elio

ellert · #3 (**permalink**) 04-28-2008, 12:00 PM

Thanks

IAP doesn´t have the repair kit in stock.
+Centeline has the cylinder but not the kit . I´m just looking for the rebuild kit
In Europe the give two sizes 3/4 or 11/16 bore so I was wondering if anybody knew the size of the US version.

B.R

Ellert in Iceland (of all places)

**ossodiseppia** · #4 (**permalink**) 04-28-2008, 12:35 PM

Just because you have a US spec Spider doesn't mean it has a specific size cylinder. The original cylinder has more than likely been replaced several times. The only way to know the size is to pull the unit and measure. If it were my car, I install a new one. You may as well replace the slave cylinder too.