Oil Separator hoses

TSuppa · #1 (**permalink**) 11-23-2007, 09:31 AM

I am in the middle of replacing all the hosed under the hood. Trying to determine where the 2 small hosed on the bottom of the oil separator go. As you look down on the separator they are at 2 and 10 oclock. TIA

cmlmtn · #2 (**permalink**) 11-23-2007, 09:45 AM

Correct me if I'm wrong, but I think the one at 2 should go to the intake plenum and the one at 10 should go to the base of the dipstick.

WIP · #3 (**permalink**) 11-23-2007, 09:53 AM

Howdy... am kind of doing something similar (by now anyways, ha ha)... if you check out this link and I think reply 6, there is an awesome link with photos etc... that show all the hoses (or most) and what they are and where they go ... folks were really helpful for me... might help you as well.

Fuel Pressure Regulator - Hissing sound???

**ghnl** · #4 (**permalink**) 11-23-2007, 10:58 AM

We'll be glad to help you, too!

There is a whole page about the L-jet system in my signature. There is info/pictures/sketches there - some about the oil vapor separator/emissions system.

**ghnl** · #5 (**permalink**) 11-23-2007, 02:03 PM

More info - espcially about the nipples that screw into the intake plenum - in this thread.