specs for nuts for header mounting flange, pls

Joe Papa Sr · #1 (**permalink**) 10-01-2007, 06:27 PM

Friends, my son has the alfa 87 spid in Tallahassee (FSU), and he said to me the bras nuts that bolt down the header flange to the studs that go into the cylinder have gotten loose, so he tightened one (but one fell off and is GONE). I would like to buy a few , even if they are not brass, at a local store, and UPS them to him, so he can add the one to the stud that is missing one, and add one for a double nut to the other, until he makes it back home, at Thanksgiving time.

Anyone know if it is a 6 or 7 or 8 or 9mm? also, the pitch of the thread is v important. THANKS for helping my son make it back through COP territory without a header missing and sounding LOUD! LOL!

**ossodiseppia** · #2 (**permalink**) 10-01-2007, 06:42 PM

They are 8X1.0. IAP sells them. If you don't have any luck finding any, you might be able to twist my arm for a couple.

Joe Papa Sr · #3 (**permalink**) 10-02-2007, 06:57 PM

Quote:

Originally Posted by ossodiseppia

They are 8X1.0. IAP sells them. If you don't have any luck finding any, you might be able to twist my arm for a couple.

**ossodiseppia** · #4 (**permalink**) 10-03-2007, 10:01 AM

Quote:

Originally Posted by Joe Papa Sr

Thanks, bone....might try local first, if not, maybe I will twist your arm. IAP will bill me $8 just for shipping. Thanks again. (and my son thanks you too!)

Oh, you're absolutely sure that they are 1.0 pitch? Dont want the kid at FSU cross threading them.......

johnalfa1976 · #5 (**permalink**) 10-03-2007, 12:10 PM

Try Ace Hardware. Pretty good source for my metric needs.

Joe Papa Sr · #6 (**permalink**) 10-03-2007, 06:29 PM

Thanks osso, and John. I wil try ace....tried napa, but 8mm is too small. (but I think brass may be asking a little too much......)

Yeah, $8 for some 25-50 cent a piece nuts is much, and all those maintenence things....just did them all a while ago. Maybe the starter will go soon? (shhhhhhhhh) LOL!!