Alfetta saloon 2.8 v6 - Page 3

**sfalfa** · #31 (**permalink**) 09-28-2007, 05:58 PM

Quote:

Originally Posted by GVVGTV6

Those wheels don't come cheap either do they - If I was really gonna drop a wad of dollars it would be on a set Schmidts - I love the looks of those.
GV

GVVGTV6 · #32 (**permalink**) 09-28-2007, 06:49 PM

Now that is funny! Those are the exact wheels they'd look good on that sedan novula!

GV

AR4me · #33 (**permalink**) 09-28-2007, 07:50 PM

Novula,
love what you are doing with the Alfetta

Keep the pics and updates coming.
Jes

Novula · #34 (**permalink**) 09-29-2007, 12:41 AM

Quote:

Originally Posted by GVVGTV6

Now that is funny! Those are the exact wheels they'd look good on that sedan novula!

GV

Novula · #35 (**permalink**) 09-29-2007, 03:31 AM

Got my fuel delivery things a fuelpump good for 450 hp,fuelpress regulator malpassi and a kenne bell boost a pump kit adjustable from inside the coupe we will see if it works,it works like this when you press full throttle it gives more power to the pump instead of going hipress all the time,couldt be nice for mpg and of course the fuel dont get so hot either.

Novula · #36 (**permalink**) 09-30-2007, 06:36 AM

Tryed the wheels out today as you can se,they dident fit that great in the front,its to much offset on the front rims, looks like a hotrod or someting

I dont really now wat to do because i really want this wheels on the car.
If i go a bit more camber in the front and a more narrow tyre so the tyre sides leaning inboards it maybe fits inside the fender.

I think i am going for 195/45/16 in the front and 205/45/16 in the rear on the pictures i have 205/50/16 in both ends.

GVVGTV6 · #37 (**permalink**) 09-30-2007, 08:39 AM

The wheels look great on the car, but agree on the front. That really bites on the front end ... to bad if they were too much under you could get wheel spacers, but judging from where your rim is at to the fender it doesn't look like tire size is going to make much of a difference. Seems like major modifications would need to be done to get them to tuck under - the back look just right though.

GV

Novula · #38 (**permalink**) 09-30-2007, 09:43 AM

will see how i am goona do.build a entairly new front end

no dont think so,but maybe re-build the fronthub for little less offset,i will figure it out,i cant give up my plans for this wheels now i am totally sold out for them.

Giulia67 · #39 (**permalink**) 09-30-2007, 01:07 PM

Why can't you do as I did to my rear wheels for my Giulia, I "took" of material of backside of the hub on the wheels so they would fit under the wheel arcs of the Giulia

Fredrik

Novula · #40 (**permalink**) 09-30-2007, 01:54 PM

Yeah I will take some material of from the backside of the flange on the rim, but i can't take so much maximum 5mm,but this eavning i moved the hole front suspension inwards like 10mm and put like 2 degrees camber so i think it will clear the fender now......

**sfalfa** · #41 (**permalink**) 10-08-2007, 06:38 PM

Here's pics of my sedan with coupe seats installed - give you an idea of how it'll come out.

gt601 · #42 (**permalink**) 10-09-2007, 04:00 AM

How is the hight of GTV seats compared to the original seats that came in the car? I have a good Fetta coupe interior That I may do that to. Or I'll go the Milano way.

Novula, Keep the pictures coming. Your car is a beauty!

Paul

**sfalfa** · #43 (**permalink**) 10-09-2007, 08:42 AM

They're a bit lower. However, the driver's side coupe seat has that manual height adjustment - so lifted to it highest point, it's just right.

Novula · #44 (**permalink**) 10-10-2007, 10:02 AM

Quote:

Originally Posted by sfalfa

Here's pics of my sedan with coupe seats installed - give you an idea of how it'll come out.

euroshark · #45 (**permalink**) 10-10-2007, 11:36 AM

Those wheels are gorgeous!!