Another MONO Sleeve

[kengta]

Here are some Pics of a Mono Sleeve I got in the early 1980's as part of deal for 1966 Sprint GT club racer that I purchsed. I may have been race in that or another chassis, a 1969 GTV, in CASC Ontario region B-sedan events.

The block is a 1750 base.
The head came with it and the pistons.

The 1750 head has a sleeved manifold with Aeoquip fittinga wellded on it. The sleeves protude als insert into the resesses in the head. The valves Are GTA.

[kengta]

There is aglitch on uploading the pics so I post Soon

[borrani]

you TEASE!!!

[kengta]

First -Left side
Second -Right Side
third -Top
Fourth - S/n AR00548*A3547*

[kengta]

Note the water passage work, some blocked, some sleeved and drilled out.
head has GTA Valves and valve angles and gear.

[kengta]

Intake manifold showing protruding sleeves which has been matched to the head. I guess they bolted the manifold to the head, bored through each port into the head. Inserted the sleeve and locked it to the manifold at least using set screws. the ported the manifold.

[kengta]

Re the first set of pics, block right is left and vica versa. I usually know which is which.

Ken

[gtaj]

ken those are nice. what are you going to do with them?

[kengta]

Quote:

Originally Posted by gtaj ken those are nice. what are you going to do with them?

[borrani]

Remarkable how the spark plug hole intersects the valve seats. Better be careful not to run too tall a spark plug!

What's a standard head thickness, 4.412"? This sucker's cut way down if that's the case!

Steve S.

[Biscione]

What is the bore of the monosleeve?

Biscione

[kengta]

Quote:

Originally Posted by Biscione What is the bore of the monosleeve? Biscione