|Topic Review (Newest First)|
|05-10-2013 06:45 PM|
While I don't say this often where you are concerned....you are right.
Right on the fact about selling a sorted 164, right that I need to post separately and right that I owe you some wrench time on the Maratona.
|05-10-2013 04:04 PM|
As i said last week to you, here we go again, another 164 nicely sorted and you are selling it! Gonna owe me big time on the Maratona project as I am sure I will do the same for you on the Montreal. You may want to post this sale on a separate post as some prospective buyers may not notice you have this for sale on this post. And stop looking at the alfas' for sale section....i will ask Alfisto Steve if he can have you banned from that side of alfabb for at least the next year or so....hehe!
|05-07-2013 09:52 AM|
|alfajp||Last set of pix....|
|05-07-2013 09:44 AM|
|05-07-2013 09:42 AM|
Selling the 164B I just bought in December
Tried to decide if I should start a new post or continue this one...there were a lot of folks that commented, so opted for here.....
Unfortunately, I need to put up for sale my 164B that I just bought in December. While having my Montreal engine looked over by Richard Jemison, he found cracks on the plug thread side of the combustion chamber for each cylinder. Apparently, this is a common problem with Montreal engines…..just one that I had not budgeted for in the rebuild. The proceeds from the sale of the 164 will help pay those additional costs.
Since I bought the 164 in mid-December from Steve’s friend, Gene, who was the original owner, I have done the following work:
1. Replaced timing belt and tensioner
2. Replaced both cam seals (one was leaking oil badly)
3. Plugs, plug wires, cap/rotor
4. Flushed all fluids and replaced (oil, transmission, coolant)
5. Replaced main serpentine belt (and newer tensioner from a parts car....more on this later), alternator belt and power steering belt
6. Installed new coolant temperature sensor and installed manual switch as backup in case the low speed fan resistor fails. It is working fine, just liked the backup. Electric fan comes on when it is supposed to...car runs at right temperature
1. Had resonator pulled as it had rusted through and a new straight pipe section welded in…great sound
2. Cleaned and adjusted brakes...pads were recently changed when I bought it
3. Rotated tires....still good tread left on all four
1. Car was supposedly converted to R-134a...when compressor failed I saw it was not...
2. Put in a good R134a compressor from my parts car
3. Installed new filter/drier
4. Installed R-134a suction/discharge hoses
5. Installed new cross flow condenser
6. The car is quite cool....better than when it was from the factory
1. All switches, buttons work....electric release for fuel door and trunk, central locking, sunroof, etc.
2. Had to sew up two seams on the seats...no tears, just seam thread came undone. Seats are fine, a little fading on the rear headrests.
3. Carpet is somewhat faded and a stain in the rear center hump
4. All power windows work, both power mirrors work
The overall good:
1. Starts easily
2. Idles smoothly
3. Accelerates very well, engine runs well to redline, averaging 18 mpg city with spirited driving
4. AC is cool
5. Brakes are solid (this is a base model and does not have ABS, it does have an airbag)
6. No leaks
The overall not-so-good:
1. The roof and right side B/C pillar paint is oxidized and faded. The car sat for the last year and the right side bore the brunt of the southern exposure. I have tried a lot of things to remove the oxidation....it needs a re-spray.
2. There is a bit of crazing on the hood as well. That small part needs a re-spray. Rest of paint is nice….had an estimate of $1800 to get this work and the roofline work fixed and painted
3. Some mechanic, before me, changed the main serpentine belt tensioner. That mechanic used the wrong thread bolts to hold on the tensioner (he used more coarse bolts than he should have)....all that to say, I had to rethread the holes in the block and do some heavy duty anchoring with washers to get the tensioner to hold. It looks wrong, yet is absolutely correct in how it holds tension on the serpentine belt. No slipping. The work I had to do is a good argument for not having a non-Alfa mechanic work on your car
While I have a lot more dollars and time in it, I am only asking $2,000 considering driving car back to new owner, paint and that 164s don't get the resale they should.
I have attached a lot of pictures, showing the good and bad. Just washed and waxed it….it shines well.
If you are interested in this wonderful 164, please send me a PM.
|12-15-2012 11:34 AM|
|Alfisto Steve||164 sold and Verde sale pending.|
|12-12-2012 10:09 AM|
|Roadtrip||Reliability directly correlates to preventative maintenance. Most Americans treat their cars like toasters.|
|12-12-2012 08:22 AM|
Originally Posted by HeavyMetalAlfa View Post
Originally Posted by AlfaVeloce View Post
Yeah, that's about right. I had a nice (looking) X1/9 when I was 20. Left me stranded maybe 4 times in a year. Ended up selling it. If I can find a good X1/9 that won't let me down, that would be cool. But not as cool as a good Milano, Alfetta, GTV6 or Spider. Not much of a Fiat guy anymore.
|12-12-2012 06:13 AM|
Originally Posted by HeavyMetalAlfa View Post
|12-12-2012 05:42 AM|
Interim update on the 164.....deal is done and I pick it up this upcoming Monday. Have all my materials for servicing and ready to get it on the road.
Will post pix when I get it home.
Cannot wait to be behind the wheel of a 164 again....been a year to the day I sold my 164L and it seems much longer than that!
|12-11-2012 09:10 PM|
Wow tyler, you have a low opinion of Alfas. They do not breakdown more than any late 80's car would. They are more dependable than most sports cars of that era. And I believe Genes is a good one, I would like it myself if I could.
Have you driven a lot of miles in Alfas? It doesn't seem like it.
|12-11-2012 08:49 PM|
Good luck with the sale.
Also, Jalopnik linked this ad to their home page. Someone asking whether or not they should buy it. I'd say it's a matter of spontaneity and balls and fun. Otherwise you wouldn't consider buying an Alfa Romeo. Italian cars are about the love of driving and having enough balls to say "You know, I'd rather not drive a cliche on wheels, so I'm going to grow an imagination and get something special". Yes, depending on the Milano, you're not going to do much driving. It's gonna break down. It's not a probability, it's a fact. Water is wet and your Alfa Romeo will break down. If you have the garage space, an AlfaBB account, enough money to keep the car going and the resources to track down the parts you need, then do it. Don't ask questions, just throw your money at the person selling the car and have an adventure. ---Tyler.
|12-01-2012 06:38 AM|
|Flavia||Is it necessary to skip 2nd to drive the Verde, that is say, from Blacksburg to south central PA? Do you know the mileage Steve? Thanks|
|11-30-2012 04:49 AM|
John hope you enjoy the new used 164. I hear it is a 5-speed, too. I thought it was but couldn't remember for sure. Gene and his wife are nice people.
Now let's hear it from a Verde buyer next.
As for GTV6s, I owned an 86 plus two more a 83 parts car I scrapped and an 85 with the 83's engine. I just flipped it and sold it along with the rear sheet metal I cut off the 83 to fix it. Sold 86 on ebay years ago with the 85's engine and 87 Milano heads in it. Musical GTV6s.
Sold my 87 Milano Gold same weekend I sold the 85 GTV6. Sold them the two guys from NC who came up together to get them and drive them back. They had a third bud in a Suburban drive them up and haul the sheetmetal back for the GTV6.
I am sure Gene's Verde will find a good home, too.
|11-29-2012 08:02 PM|
|alfajp||Sure not many more configs left to have...funny thing is I have never owned a GTV6.....that is your and BigE's department!|
|This thread has more than 15 replies. Click here to review the whole thread.|