Go Back   Alfa Romeo Bulletin Board & Forums > General Forums > Motorsports


Reply
 
Thread Tools Display Modes

  #1 (permalink)  
Old 05-13-2008, 10:34 AM
Vitesse's Avatar
Vitesse Vitesse is offline
Registered User
 
Join Date: Feb 2007
Location: Chicago, Illinois - USA
Posts: 25
F3 Ellegi Motori Alfa Engines

Can anyone out here / there in Alfa-Land help me get a part for an Ellegi-Motori Twinspark F3 2-liter engine?
My dry sump oil pump toothed drive belt which is a Gates Powergrip 41059 x 1/2 has been torn and needs to be replaced. My emails to Ellegi-Motori both in English and Italian requesting this belt have gone unanswered. Gates in the USA says the belt is only available in Europe. And the engine builder who set this motor up in England spoke of difficulty in getting this belt anywhere but in Italy.
If there is a chance anyone knows of someone who has campaigned one of these cars and may have a spare, I would be most grateful for the help in buying it.
Or if there is someone with a connection at Ellegi Motori...

The car is a Dallara 391, but I suspect the oil pump drive setup is similar on the 392 and 393.

Thanks in advance.

Ken
__________________
[SIGPIC][/SIGPIC]

It's better to burn out than to rust out - n.young
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Articles

Advertisement


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0
Copyright 2002-2008 AlfaBB.com All Rights Reserved.


An exclusive design by: Forumskin.com