Colombo Bariani Cams

[quattrofoliover]

I have a 1992 75 3.0V6 QV.

I was considering dropping in some Colombo Bariani Cams into my
street driven 75. I see from their web site that they have three
specified cams. I'm interested in the performance street versions and
would like to get some feed back for V6 owners on these cams.

I like the low down torque of my standard Motronic ECU'd 75.

Have any of you had your car dyno tested after fitting these cams.
If you have, I would like to compare the bhp and torque figures
against the factory standard. I would also like to compare them with
the bhp and torque graphs from Squadra Tuning.

With my Motronic equiped car, the Squadra Tuning Chip raises the bhp
from 192bhp to 205bhp. The torque figures are also up. What appears
to be nice to the untrained eye, is both the bhp and torque curves as
nice and smooth and without dips across the rev range.

I've seen one dyno graph posted on the web for my car. The cams
showed 238bhp which was nice, but it was all in the last 2000rpm and
nothing below 4000rpm. No good for the street.

I fact the Squadra Chip WAY out-performed this cam arrangement all
the way up to 6000rpm.

Squadra chip £240 (UKP)seems like a good buy.

I'm hoping that the CB cams are better designed and that the street
versions will up the performance across the whole rev range like the
Squadra Tuning Chip.

I have E mailed CB in Italy and await some feedback and hopefully
dyno sheets from the factory itself.

But you guys are living in the real world, so dyno figures would be
nice, but I also want feedback on how the cams make the car FEEL.

Vince. London England.