JoeCab

Hi Joe. I just received one of your centerline replacement electronic ignition distributors and am having a lot of trouble installing it. The 2 teeth on the distributor shaft are a few microns larger all around compared to those on the Mirelli it is replacing. Have you ever heard of anyone having to file these teeth down a bit. I just cannot get it to seat properly. Any suggestions would help.
Thanks, John

Joe.
Doing a backdate exhaust system on a 86 spider.
was going to get the &$ stock manafold and the magnflow system.
But saw PH 115 header and wanted to know if you can just get the center and rear Magniflow system thx

joe, since no one responded to my plea for altitude jetting info, I thought I'd go to you direct. What jets do people run at your altitudes or higher. I'm at 7000. 40 dcoe 32's, 2 liter with 8l? cams. thanks gene,,, I'm gocorp (or Olsen)in your accounts

Do you have any suggestions for cams that you sell for a L-tronic spider (86)?
doing a rebuild and going with motronic pistons,backdate exhaust manafold, the forum ss exhaust system- with 02 bung ,lightend flywheel, electric fan..(emissions not a huge issue but i want it to run on the cleaner side)
Do I keep the VVT or not?
Wes ingram sugests his non VVT X-16 cams, IAP sugests the special VVT cam on intake only. (would rather buy the whole rebuild from you.)
With the limited capacity of the FI I just want a fun free rev motor that feels alot sporter than stock (that can't be hard)
Also would your head with the oversize valves be over kill?