Hey Cameron!
OK - the heads - not quite done-done yet, but tested - good - porting done etc. Maybe I'll have them Friday/Monday!
He has the cams there along with the brand new/rebuilt cam-followers, new valves (over-sized on the inlet) - everything ready. Resurfacing done, valve guides are in - just the 2nd cleaning to do now and then assemble with new valve stem seals, shim the valves/cams/followers etc!
Custom headers, ceramic coated inside and out in a 2,000 degree thermal heat-barrier are here packed in a box and ready to go along with your GoTech Pro ECU & harness. Go to
www.gotech.co.za and download the latest software (I think that it is version 5.4 of the tuning software) to the laptop that you will be using for tuning. (I've included copies of the CD and the manual, but they may be older versions that what is on the website!)
I've put the VW VR6 - coils in the box (just waiting on the custom-made Magnecor plug-wires - they are still on order!) The 60-2 trigger-wheel is in the box and I am waiting on a sensor!
I have not been able to find a distributor-delete cap-off plate yet - you could just leave the old dizzy in there to keep dust out and oil in... You'll just leave the distributor unplugged for now!
I have picked up the sub-assembly and I am headed to the machine-shop this afternoon!
I'll get this box out to you as soon as possible! Please verify the shipping address for me again!
Cheers, JvR
