Alfa Romeo Bulletin Board & Forums - View Profile: junglejustice

junglejustice junglejustice is offline

Registered User

  Visitor Messages

Showing Visitor Messages 1 to 10 of 19
  1. Alfa1277
    12-29-2015 05:02 PM - permalink
    I am fixing up a '74 Spider and am toying with the idea of converting to EFI. Do you guys have a conversion kit and what is the cost?


  2. junglejustice
    12-28-2015 04:54 PM - permalink
    I went with the (heavy) Alfa Sei (Six) sedan differential from the (very scarce) automatic sedan (longer final drive ratio...) That cast iron piece with it's long torque tube fits in there just like a transaxle and it hangs from the stock single rear top mount in the chassis (where the transaxle used to hang...) Side shafts fit. Lots of things become a direct fit at that point. Needs a custom 24" drive-shaft with the BMW V8 M5 front GIUBO and the CV that we used at the rear...
  3. EVO 75
    12-03-2015 06:00 PM - permalink
    EVO 75
    Hey JJ, its been a while. Bob here from melb. i bought the 3.2 w ITBs from dawie through you a few years back. if you remember.

    Any how, im currently engineering myself into a big headache. Ive opted to convert to a front mounted gearbox as the power i want to put
    through the old one would serious eat it alive. so t56 6 spd it is. I was just wondering what you used/did for the diff in your 75/milano?

    any suggestions?

    Kind regards
    EVO 75
  4. nisso53
    11-18-2015 11:23 AM - permalink
    I looking to install a 2001 916 3.0 24V engine on a 1982 GTV6. The engine still on a crate from Fiat/Alfa.
    I would need the electronics, intake manifold and exhaust manifold and who knows what else to make it run properly. Any ideas or comments?
    Thank you,
  5. karlcchen
    02-13-2015 06:53 PM - permalink

    I have a 1994LS with automatic that currently engine can't start. But the transmission only has less than 20,000 miles - rebuilt by Eriksson Industrial.
    The transmission is like working great.

    I don't have time to debug what is wrong, and my wife is forcing me to sell soon.
    I don't want to donate and go to Junkyard...

    Please contact me, I may be able to help.

    Cell: 408-406-9282
    Home: 408-694-3974
  6. Louis Ho
    02-10-2015 10:13 PM - permalink
    Louis Ho

    i have a 164 24v qv, and im from hong kong
    i know that u have a gta gearbox for sale
    im thinking of upgrading mine to a 6 speed unit.
    is this a direct fit?
  7. bryce
    10-11-2014 01:52 PM - permalink
    Hey jungle justice, do you know where I can find a set of early gtv6 valve covers, the plain ones with alfa script on bottom?
  8. ChaosphereIX
    06-21-2014 02:28 PM - permalink
    Hello JJ,

    I tried to contact you earlier about this issue, but I guess I got lost in the mix.

    I have recently made a purchase of some of your cams for the 155 V6 from Zavier. Could you give me any more info what these cams were designed to do? Do I lose all low end torque?

    I was wondering if you could point me to what else I would need to do to set up for your cams that you sold him. I have an Autodelta chip currently, a cat-back, custom headers, and soon to be de-cat exhaust. Pipercross Venom CDA. The car also has a FSE PBV in place of the fuel pressure valve. Any other info you need? Does fuel pressure need to be increased for these cams? Tougher valve springs? Etc...

    Also, I have to say thank you for working on a car that does not get a lot of aftermarket attention. Much appreciated.

    Fire me an email with any info you could help me out with.

  9. robvolz
    06-03-2014 06:26 PM - permalink
    This may seem like a silly question, I have owned 164s (bought Paul's if you recall) as well as spiders with the V-6 conversion.

    Currently my spider conversion has the ZF 5 speed with dog-leg. **** fine transmission.

    Is there that much advantage to having the Alfa 6 speed and would it work on a RWD car??
  10. bborbone
    03-25-2014 07:37 PM - permalink
    Hi JJ,

    I was sent to you by Giuseppe and Giuseppe JR out of Alfa Import Center. I am looking to longitudinally mid-mount my 3.0L 24V into a custom chassis. Are you aware of any transaxles that mate well to the 24V? Perhaps some Porsche or Audi ones?

    Johnny B

  About Me

  • About junglejustice
    Tall, Dark & Pissed Off
    Granolaville, Washington
    Alfas & 2-Strokes
    Business Owner, Broke
  • Signature
    Full-Race 3.7 Litre 24v Milano & 6-Speed Getrag; 3.7 Litre 24v Turbo Project! Various Classic Motorcycle Projects


Total Posts
Visitor Messages
General Information
  • Last Activity: Today 04:30 AM
  • Join Date: 06-24-2003


Showing Friends 1 to 9 of 9
  • 604doc
    • 604doc is offline
  • Bad Brad
    • Bad Brad is offline
  • FlaAlfa
    • FlaAlfa is offline
  • mfx8898
    • mfx8898 is offline
  • racerx9146
    • racerx9146 is offline
  • ROCisIN
    • ROCisIN is offline
  • stefmiesterb
    • stefmiesterb is offline
  • streetfame
    • streetfame is offline
  • taco love spenc
    • taco love spenc is offline
    • Send a message via AIM to taco love spenc
    • Send a message via Yahoo to taco love spenc


No results to display...


02:16 PM - junglejustice quoted archeologist in post Milano Sunroof Repair Parts Available?
We will have a complete sunroof c...
07:03 PM - junglejustice quoted nizam in post The Alfa Milano / 75 wheel picture thread
JJ - does your outboard br...
07:03 PM - junglejustice quoted oz3litre in post The Alfa Milano / 75 wheel picture thread
JJ - does your outboard brake...
10:16 AM - Saabretooth quoted junglejustice in post 3.5V6 Alfa engine parts, anyone??
Anyway, well off-topic by now... ...
12:57 PM - PSk quoted junglejustice in post Corvette C5/C6 transaxle in a high horsepower GTV6
Pete, you have lost me! The total ...
08:56 PM - pushrod quoted junglejustice in post Corvette C5/C6 transaxle in a high horsepower GTV6
As far as power; for now she's get...
09:10 AM - planetmojo2 quoted junglejustice in post 2nd 3.7 Litre 24 Valve Milano Project!
Thanks for the feedback on the ser...
07:15 PM - Jim G quoted junglejustice in post Cold Start Sensors Still NLA?
Has anybody figured out a replacem...
05:56 PM - Alfisto Steve quoted junglejustice in post Cold Start Sensors Still NLA?
Has anybody figured out a replacem...
05:28 AM - AvorioVeloce quoted junglejustice in post Rear Adjustable Camber & Toe DeDion Modifications;
Casta28 -It's been a while since I...
09:12 PM - junglejustice quoted Klassikgtv in post Rear Adjustable Camber & Toe DeDion Modifications;
Looks great . The Imsa 75 has a...
09:00 PM - junglejustice quoted Casta28 in post Rear Adjustable Camber & Toe DeDion Modifications;
...dified the de dion Casta28 -It's been a while s...
05:13 AM - AvorioVeloce quoted junglejustice in post 1985 GTV6 24V Build
Rob, nice job on the installation ...
06:59 PM - JoeCab quoted junglejustice in post Installing Upgraded GiroDisc Brakes on 4C Today!
So, no - these are NOT just simply...
06:11 AM - Alfisto Steve quoted junglejustice in post Outside Rearview Mirriors Suddenly Not Working!
For no reason - adjustment in all ...
For the best viewing experience please update your browser to Google Chrome