Alfa Romeo Bulletin Board & Forums - View Profile: MidLifeCrisis
Platinum Subscriber

MidLifeCrisis MidLifeCrisis is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. Curtis
    11-28-2012 05:38 AM - permalink
    Curtis
    Midlife, Sorry I don't think anybody is dodging you. It's just not possible to answer. Valve length, spring installled height, retainer type and relation to stem, cam base circle all effect this. You might consider taking everything to the machine shop and paying them to assemble it.

    You win the shiny engine award. Cleanest engine I ever saw. Bet that was a lot of work.
  2. glaing
    04-03-2010 05:42 PM - permalink
    glaing
    BTW
    Good looking Alfa too.
  3. glaing
    04-03-2010 03:46 PM - permalink
    glaing
    Hi Mike,
    My mom had a very full life. She stayed active and even bowled two days before she passed away. (90)
    I was debating on whether to flat bed the alfa home. I decided to drive it home and made it without incident. I just replaced all the calipers and the MC. Doinf motor mounts and a front end bushing next week. Next is a leak down test to figure out why two cylinders have low compression. i'm guessing a head gasket. Where are you living these days?
    Gordon

  About Me

  • About MidLifeCrisis
    Location
    Connecticut

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 09:55 AM
  • Join Date: 04-08-2005

  Mentions

No results to display...

  Quotes

03-17-2017
06:03 AM - Alfisto Steve quoted MidLifeCrisis in post Milano No Spark
Hi, My son and his college buddie...
03-04-2017
12:09 PM - MidLifeCrisis quoted Veep in post Handbrake
Wish I saw this sooner......
01-16-2017
04:34 PM - Duk quoted MidLifeCrisis in post 74 GTV Suspension Upgrades
Hi, Anyone have any good "trick...
01-12-2017
02:32 PM - MidLifeCrisis quoted barboncino105 in post Shocks
if the shocks are set stiff & movi...
01:21 PM - MidLifeCrisis quoted barboncino105 in post 74 GTV Suspension Upgrades
all im saying is that for now, if ...
01-10-2017
04:50 PM - MidLifeCrisis quoted barboncino105 in post Rev Limiter
the 4.1 will reduce revs by 10% fo...
01-07-2017
03:23 PM - PSk quoted MidLifeCrisis in post 74 GTV Suspension Upgrades
Thanks... didn't even think of tha...
02:35 PM - Alfajay quoted MidLifeCrisis in post 74 GTV Suspension Upgrades
I've found that the tracks in my r...
02:09 PM - MidLifeCrisis quoted Alfajay in post 4.1 Diff
If you will be using the car...
01:43 PM - Alfajay quoted MidLifeCrisis in post 74 GTV Suspension Upgrades
After flirting with the idea of ra...
12:56 PM - MidLifeCrisis quoted PSk in post Backing Plate/Dust Cover
Nice, but you will not b...
12:45 PM - PSk quoted MidLifeCrisis in post 74 GTV Suspension Upgrades
These were all sandblasted and the...
01-05-2017
05:06 PM - dlbehrns quoted MidLifeCrisis in post Don't know.
How about the pin holding the shaf...
01:55 PM - dlbehrns quoted MidLifeCrisis in post Hmm???
How about the pin holding the shaf...
01-03-2017
05:35 PM - dlbehrns quoted MidLifeCrisis in post Up past the brake pedal?
+1 on the pivot shaft. Can you pul...
12-27-2016
01:36 PM - racingswim2006 quoted MidLifeCrisis in post Milano/75 Brembo Calipers
Hi Rob, The uprights were done ...
10-05-2016
06:08 PM - MidLifeCrisis quoted Mark_toro in post Alfa Romeo Auction in New Jersey
Not Di Fatta they are in Balti...
08-05-2016
09:14 AM - MidLifeCrisis quoted gigem75 in post Tools
I'm not sure on the zero to ...
08-02-2016
07:20 PM - MidLifeCrisis quoted gigem75 in post Love it!
The cheapest way is to video...
07-26-2016
09:39 AM - MidLifeCrisis quoted alfaparticle in post Weber 45 DCOE Jetting/Tuning
Same setup as my Spider. Connect ...
 
Replace with
For the best viewing experience please update your browser to Google Chrome