70' 1750 up for restoration

[giulia_veloce]

Yes,hand made here.
A jig-template was made for both sides.Takes about 3 hrs of banging with a hammer.
Amazing how much you can bend a straight piece of sheet steel.
i suppose its covered by the bottom of the front gaurd and the removable plate behind the inner gaurd,but thought a good relica was the thing to do..
Not stamped out,but banged-stretch,brutilated by a hammer only.

Robert

[trs1750]

Almost done with the b-pillar now.

[bstokkan]

Nice work Thomas!!

Dad