Join Date: Dec 2009
Location: Hobart Tasmania
Steering wheel removal...
You will need a steering wheel puller to do it,but an inexpensive one from your local auto store should be more than adequate. You might just have to find some longer 6mm (I think) bolts than may come with the kit to screw into the wheel centre. A bit of a tap on the column end may help if tension on the puller alone isn't budgiing it. A bit of penetrating fluid won't hurt either.
Good luck. I have the same car, in similar state when purchased. Less rust, but more out-of-shape panels following quick-and-dirty repairs in the past.
Last edited by Ranz; 10-07-2016 at 04:04 PM.