GTA head studs for "testa streta"

tobiazzi · #1 (**permalink**) 10-28-2007, 02:44 PM

Hello,
Where can i find long head studs for the "testa streta" gta junior?
And taking the old ones off the engine any experiences?

Regards

Alex · #2 (**permalink**) 10-28-2007, 05:32 PM

Not many people in here seem to have much direct experience of these engines, but you could do a lot worse than sending a message to AlfaBB member vsharp

Good luck, and let's see some photos!

South Africa · #3 (**permalink**) 10-30-2007, 12:16 PM

Dear Tobiazzi,

I have some original GTA Junior 'testa stretta' and GTAm engine block cylinderhead bolts. I am not sure exactly what you want as there are quite a few different lengths and configurations.

tobiazzi · #4 (**permalink**) 10-31-2007, 04:07 PM

Hello, South Africa
I need the heads studs for the 1300 GTA "testa streta"
if you have 10 please let me know
Regards

tobiazzi · #5 (**permalink**) 10-31-2007, 04:19 PM

One more thing.
When i said "testa streta" i am talking about the tall head for the racing injection spica.
Regards[IMG]c/documents and settings/TobiasMartins/gta 1300[/IMG]

South Africa · #6 (**permalink**) 11-10-2007, 05:55 AM

Dear Tobiazzi,

Please find attached a photograph of the GTAm type cylinderhead bolts that I have as spares