1988 Spider Graduate Hazard/Flasher switch inop.

repatten · #1 (**permalink**) 06-13-2008, 05:12 AM

All turn signals work. Hazard switch has been replaced.
Nothing works; no dash hazard indicator light or any outside turn signal lights. I have PapaJam's 1988 schematic. (Thanks, PapaJam; donation sent)...

Richard

**Tifosi** · #2 (**permalink**) 06-13-2008, 08:43 AM

Silly question, but is the switch actually wired up? (didn't get it's connector knocked off while something nearby was being worked on, or the like?)

repatten · #3 (**permalink**) 06-15-2008, 03:20 AM

I pulled the console and lower dash in order to fix clock, dash lights and turn signal problems. The turn signal issue was an open ground and open hot wire. Still sorting out the clock problem. No dash lights because rheostat plug was not connected. DPO...

I replaced the switch and cleaned connectors G84 and G73 with Deoxit. Still no flasher.