hazards but no blinkers

[cmlmtn]

Did a search, but no one describes how the finally fixed it.
Conditions;
All conditions- hazards work as they should
ignition on, no lights on- blinkers do not work at all
ignition on and parking or headlights on- blinkers work, but are steady ie no flash

I cleaned the fuse panel and replaced all fuses, and looked at the soldier inside the flasher relay on the fuse pannel. Is there a seperate flasher for the blinkers only?
BTW...I get no power to the turn signal switch when the lights are off.

[Alfacliff]

someone has messed with the wireing. the turn signals should work with the key off just as the 4 way flashers do. they get the power from the same source.
cliff

[Tifosi]

Hazard and turn signals share the same relay.

Beyond that, I'm kinda clueless as to why you're experiencing what you are in the way it's doing it.

[cmlmtn]

I'll start tracing wires...looks like DPO got me again!

[Alfacliff]

arent po's fun?
cliff

[cmlmtn]

Got it!
Hot lead for switch was plugged into a terminal with no power. Thanks to Papajam's diagrams it was an easy fix!