Help! AC Blower not turning on after carpet install

[fvcruz]

Hope someone can tell me all of the fuses and locations for the AC system.
I was replacing my carpet on my 89 Spider and cut two wires (Very stupid) they are a light blue and a Red. I reconnected them but now my ac does not turn on.. I am sure I short circuited when I cut the wires...or can the switch have gone bad? I never took the wires out of the switch, there is only one pin that is not connected..but don't remember if it ever was. Thought I would start looking at all the fuses first. I already checked under the fuse box and the in-line 20 amp looks good...anywhere else to look?

[dghii]

The 20 amp inline fuse goes from the fuse box (behind fuses 6-8 on my 84) directly to the blower switch. check this thread for more information.

http://www.alfabb.com/bb/forums/spider-1966-up/41372-name-part.html

[fvcruz]

thanks !

Was not the fuse..but a loose ground wire caugght underneath the new carpet.. everything ok now..Link was very helpful though